Warren Controls Series 2800 Precision Globe Control Valves


Warren Controls Series 2800 Precision Globe Control Valves feature rugged bronze or stainless steel bodies with a variety of trim materials and port sizes. The equal percentage and linear plugs in the 2-way valves and linear plugs in the 3-way valves provide excellent modulating control of a wide variety of fluids for pressure, temperature, level, and flow applications from –20 to 500ºF. The Series 2800 is ideally suited where value and long life are important objectives for applications including but not limited to the Chemical, District Energy, Food & Beverage, General Service, Refining, and Pharmaceutical Industries.
2820 Two-Way Single Seat Unbalanced Valve
The most commonly applied solution with ANSI Class IV and VI shut-off.
2830 Three-Way Mixing Valve
This valve has two inlets and one outlet, and is the simplest solution for mixing or bypass applications with ANSI Class IV shut-off. In normal applications the inlet pressures are near equal and control is possible from 5% to 95% of travel with inlet pressures up to 100 PSI.
2828 Two-Way Single Seat Low Flow Unbalanced Valve
Low Flow Trim with ANSI Class IV and VI shut-off.
2832 Three-Way Diverting/Mixing Valve
Designed as a diverting valve with one inlet and two outlets with ANSI Class III shut-off. However, flow can be reversed for mixing if this port configuration is desirable. The difference between the upper port and lower port pressure must not exceed 50 PSID
- Flexible Design Options provide optimum performance and extended reliability in a cost effective, application specific package.
- Dual Point PEEK Bearing Stem Guiding provides both stability and low friction, yielding reduced hysteresis and optimum control.
- Trim available in 316SS, 17-4 pH, Alloy 6, PEEK, and PTFE.
- Port Guided Plug Assembly provides stability and desired equal percentage flow characteristic.
- Lower Plug offers easy access for inspection and clean out.
- Rugged Body with a selection of port reductions.
Sizes | 1/2 to 12 in. |
Class | 250 & 300 |
Ends | Buttweld, NPT |
Body | Bronze, CF8M |
Trim | 316SST, Alloy 6, Bronze, TFE, PEEK, 17-4pH |
Cv | up to 40 |
Temp. | -20˚ to 500˚F |
Body | limit to 720 psi |
Shutoff | Class III, IV, VI |
Rangeability | 50:1 |