Jump to Navigation

Siemens 195 Multiple Input Receiver-Controller

Multiple Input Receiver-Controller

The 195 Multiple Input Receiver-Controller is a pneumatic controller that receives up to three pneumatic inputs and produces a pneumatic output signal based on the net pneumatic input and the setpoint, percent proportional band, and authority settings. The Controller can be easily changed from direct to reverse acting. Retroline Receiver-Controller (195-1000) includes decals and installation instructions to replace competitive models.

• Rugged proven design
• Plug-in air connections for ease of installation, calibration, and service
• Internal restrictors for transmitter inputs
• Stick-on scales included for setpoint dial in standard transmitter ranges
• Large, easy-to-read scales on all adjustments
• Calibration card for converting transmitter range to 3 to 15 psi (21 to 103 kPa) signal
• 0 to 30 psi (0 to 200 kPa) Pressure Gauge
• Retroline products for replacing competitive products

Select a link under the "item" tab below to order.

Cat #Descriptions
195-0003Multiple Input Receiver-Controller
Input #1: Direct
Input #2: Reverse
Input #3: Direct reset relative to Input #2
Reverse reset relative to Input #1
Pneumatic Inputs: 3 to 15 psi (21 to 103 kPa)
Control Output: 20 psi (0 kPa) to supply pressure 22 psi (152 kPa)
Operating Ambient Temperature Range: 40 to 120°F (4 to 49°C)
Supply Pressure:
Operating: 22 psi (152 kPa)
Maximum Safe: 30 psi (207 kPa)
% Proportional Band
Adjustment Range:
2 to 20% for a 5 psi (34 kPa) control pressure change
% Authority Adjustment Range: 20 to 200%
Air Consumption: 60 scim (17 ml/s), not including transmitters
Air Capacity: @2 psi (14 kPa) Pressure Change and 9 psi (62 kPa) control pressure
Supply: 640 scim (175 ml/s)
Exhaust: 590 scim (161 ml/s)
Mounting: Surface, vertical
Air Connections: Barb fittings for 1/4" (6 mm) OD polyethylene tubing. Two plug-in connectors are provided; one for the three transmitter inputs and one for supply and control lines. 1/8" NPT connection provided for control pressure gauge.
Case Material: Lexan, 20% glass-filled
Dimensions: 6.75" W x 5.69" H x 3.5" D
(171 mm W x 144 mm H x 89 mm D)
Shipping Weight: 3.1 lb. (1.4 kg)

Main menu 2