Siemens 192 HC Powerstar Heating/Cooling Pneumatic Room Thermostats


Providing proportional single output, dual setpoint with 2-pipe for high air capacity pneumatic room temperature control, the 192 HC Powerstar Heating/Cooling Pneumatic Room Thermostat provides two thermostats under one cover; one side for heating and the other for cooling. Switchover is accomplished by changing the air pressure to the thermostat.
• Dual setpoint dial available in Fahrenheit or Celsius scales
• Available in direct or reverse acting models
• Sensitive bimetal responds to temperature changes
• Integral, field adjustable limit stops
• Adjustable changeover pressure
• Large volume air capacity relay
• Wall mounting plates provides connection to a variety of rough-in terminal boxes
• Test port for fast check of output pressure without removing the cover
• Field replaceable thermometer, setpoint dials, restrictor and filters Options
Select a link under the "item" tab below to order.
Setpoint | Thermometer & Setpoint Scales | Cat # | Air Output Capacity | Action | Control Action Type | Output |
Dual (Heat and Cool) | °F | 192-207 | High (Integral Relay) | Cool (DA) | Heat Direct | Single |
Dual (Heat and Cool) | °F | 192-208 | High (Integral Relay) | Cool (RA) | Heat Direct | Single |
Dual (Heat and Cool) | °C | 192-227 | High (Integral Relay) | Cool (DA) | Heat Direct | Single |
Dual (Heat and Cool) | °C | 192-228 | High (Integral Relay) | Cool (RA) | Heat Direct | Single |
Dual (Heat and Cool) | °F | 192-209 | High (Integral Relay) | Cool (DA) | Heat Reverse | Single |
Dual (Heat and Cool) | °F | 192-210 | High (Integral Relay) | Cool (RA) | Heat Reverse | Single |
Dual (Heat and Cool) | °C | 192-229 | High (Integral Relay) | Cool (DA) | Heat Reverse | Single |
Dual (Heat and Cool) | °C | 192-230 | High (Integral Relay) | Cool (RA) | Heat Reverse | Single |
Scale; Range: | Major (minor) Divisions | 45 to 85°F, 10(2)°F (7 to 30°C, 5(1)°C) |
Factory Calibration: | 72°F, 7.5 psi ± 0.3 (22°C, 52 kPa @ 1.8) | |
Sensitivity Adjustment Range: | 1 to 4 psi/°F (12 to 50 kPa/°C) | |
Factory Setting: | 2.5 psi/°F (31 kPa/°C) | |
Limit Stop: | Field Adjustment Range | 45/85°F (7/30°C) |
Fixed Limit Stop Range | 55/75°F (3/24°C) | |
Temperature: | Storage | -10 to +140°F (-23 to +60°C) |
Ambient Operating | 40 to 140°F (4 to 60°C) | |
Accuracy at Factory: | Calibration | ±2°F (±1.1°C) |
Response | 0.1°F (0.06°C) | |
Supply Air Pressure: | Two Pressure (Recommended) Cooling/Heating | 18 psi (124kPa)/ (124 kPa)/25 psi (172 kPa) |
Supply Air Pressure: Two Pressure (Range) |
Cooling | 15 to 19 psi (103 to 131 kPa) |
Heating | 23 to 30 psi (159 to 207 kPa) | |
Two Pressure, Honeywell Competitive Model: Cooling/Heating |
13 psi (90 kPa)/18 psi (124 kPa) | |
Two Pressure, Johnson Competitive Model1: Cooling/Heating |
15 psi (103 kPa)/20 psi (138 kPa) | |
Nominal Air Consum. for Air Compressor Sizing: | 25 scim (6.8 ml/s) | |
Nominal Air Capacity for Air Main Sizing: | 40 scim (11 ml/s) | |
Nominal Air Capacity: | Supply/Chassis Exhaust | 150 scim (41 ml/s)/150 scim (41 ml/s) |
Air Connections: | 5/32" (4 mm) OD tube | |
Dimensions (with cover): | 2.16" W x 3.34" H x 1.59" D (55 mm W x 85 mm H x 40 mm D) | |
Shipping Weights: | Thermostat Chassis and Wall Plate | 0.53 lb. (0.24 kg) |
Plastic Cover | 0.07 lb. (0.04 kg) | |
Metal Cover (single/dual) | 0.27 lb. (0.12 kg)/0.7 lb. (0.3 kg) |