Schneider Electric S515 (2390-515) TAC Pneumodular® Pressure Regulator
TAC Pneumodular® Pressure Regulator
S515 (2390-515)
The S515 pressure regulator allows the manual setting of any desired air pressure, up to main pressure, where the application requires remote positioning of final control devices, remote control point adjustment of receiver controllers, or any other application where manual setting of an output pressure is desired.
• Pressure regulator allows any desired pressure (up to main air pressure) to be set with a 5/64 in. hex wrench.
• Mounts on MCS-S Socket or K502 Mounting Bracket.
• TAC PNEUMODULAR: All ports clearly labeled. Ports align with MCS-S terminals.
Select a link under the "item" tab below to order.
| Cat # | Descriptions |
| S515 | TAC PNEUMODULAR® Pressure Regulator |
| Action: | Proportional | |
| Construction: | Case | Glass-filled nylon |
| Knob | Black sunburst plastic | |
| Maximum ambient temperature: | 140°F (60°C) | |
| Supply air pressure: | Clean, dry, oil free air required (Ref. EN-123) | |
| Nominal: | 20 to 25 psig (138 to 172 kPa) | |
| Maximum: | 30 psig (207 kPa) | |
| Connections: | Barbed fittings for 1/4 in. O.D. polyethylene or 5/32 in. I.D. polyurethane tubing | |
| Air consumption: | 28.8 scim (7.9 mL/s) | |
| Air capacity: | 230.4 scim (62.9 mL/s) | |
| Mounting: | Designed for use on MCS-S manifold socket. These devices can also be mounted on a panel face or surface mounted by using the appropriate mounting bracket (refer to Accessories) | |
| Dimensions: | S515 | 2-1/16 H x 1-7/8 W x 1-61/64 D in. (52 x 48 x 50 mm) |
