Butterfly Valve Assemblies
Butterfly Valve Assemblies
Schneider Electric’s new butterfly valve line offers a wide range of two- and three-way sizes, along with low pressure pneumatic spring return, electric non-spring return, and spring return actuator models that operate with on/off, floating, or proportional control signals. All assemblies include industry leading butterfly valve features, stainless steel double “D” shafts, nylon 11 coated ductile iron disc machined to provide bubble tight shut off, minimum torque, and longer seat life. The tongue and groove resilient seat design with molded in O-ring eliminates the use of flange gaskets and allows for ease of maintenance or replacement of the resilient seat. These features provide years of optimum performance and reliability.
• 2 to 18” two-way assemblies and 2 to 16” three-way assemblies
• Chilled/hot water/glycol applications
• EPDM resilient seats with tongue and grove design and build in O-ring seal
• Stainless steel double D stem, requires no pins or screws to connect the disc and stem
• Extended neck design for temperature isolation and ease of insulation installation
• Nylon 11 coated ductile iron disc
• Wide choice of pneumatic and electric actuators and control signals
• Cast iron lug bodies mate with ANSI class 125/150 flanges
• Bubble tight shut off
• Bidirectional flow
Select a link under the "item" tab below to order.
Table 1 | Table 2 | Table 3 | Table 4 | Table 5 | Table 6 | Table 7 | Table 8 | Table 9 | Table 10 |
X | XX | X | X | X | X | X | X | XXXXXXXXXX | X |
Table 1 | Control Signal Type |
B | Body only |
A | 2-Position |
F | Floating (SPDT, center off) |
K | Pneumatic |
S | Proprotional (Vdc, mAdc) |
Table 2 | Port Code |
22 | 18” |
21 | 16” |
19 | 12” |
18 | 10” |
17 | 8” |
16 | 6” |
15 | 5” |
14 | 4” |
13 | 3” |
12 | 2.5” |
11 | 2” |
Table 3 | Disc |
F | Full 175 psi close to 12” |
U | Undercut 50 psi close |
Table 4 | Accessory |
4 | Positive positioner |
S | Auxilary switch |
Table 7 | Power Loss Action |
1 | NO |
2 | NC |
0 | NSR |
Table 8 | Flow Pattern |
9 | Special | – |
8 | 3-Wayb | NO |
7 | 3-Wayb | NO |
2 | 3-Wayb | NC |
1 | 3-Wayb | NC |
0 | 2-Way | – |
| Pattern | Main Valve Position |
Table 9 | Actuator Code |
| Please Call |
Table 10 | Body Style |
L | Nylon disc and lug body |
Service:
|
Hot and chilled water, up to 60% glycol See EN-205 Water System Guidelines, F-26080 |
Fluid Temperature limits: |
–40 to 250 °F ( –40 to 120 °C) |
Sizes:
|
2 to 18” two-way models 2 to 16 “ three-way models |
Neck: |
2” extended neck |
Flow: |
Bi-directional |
Leakage: |
ANSI Class VI seat leakage (bubble tight) |
Materials: |
Body:
|
Polyester coated cast Iron ASTM A126 Class B lug Mates with ANSI Class 125/150 flanges |
Stem: |
2 to 8”: 416 stainless steel double D stem 10 “ and larger: 316 stainless steel double D stem |
Disc: |
Ductile iron nylon 11 coated disc |
Seat: |
EPDM tongue and groove seat and molded O-ring flange seal |
Flow Pattern: |
See table under specifications |
Flow Pattern for ordering:
