Industrial Turbine Flow Meter
G2 Series
The unique modular approach of the Industrial Grade Meter line allows you to design a meter to match your specific application. Turbine choice depends on flowrate, line size, pressure rating, fitting type, chemical compatibility and temperature range. When choosing a G2 Series Meter, select from our wide variety of materials and sizes. These meters offer high accuracy at a lower cost, are compact and include a selfcontained design. G2 Series Meters are field serviceable. Electronic choices for the G2 Series Meters are covered in Section 6.
• Stainless steel meters have excellent chemical compatibility.
• Modular design allows for use with Output Modules, Sensors and Remote Transmitters.
• Local Display Computer features: 2 Totals (1 Resettable, 1 Cumulative); Factory Calibration in gallons and litres; 2 User Calibrations and Flowrate.
• High accuracy meter.
• Internal parts are simple to replace for easy maintenance.
• Powered by Lithium batteries for approximately 9,000 hours.
• Accessories easily upgrade meter.
Select a link under the "item" tab below to order.
| Table 1 | Table 2 | Table 3 | Table 4 | Table 5 | Table 6 |
| XX | XXX | X | XX | XX | X |
| Table 1 | Product Identifier |
| G2 | Industrial Grade Meter |
| Table 2 | Turbine Material & Size |
| Metal Meters |
| S05 | Stainless Steel – 1/2 in. |
| Plastic Meters |
| P10 | PVDF – 1 in. |
| Plastic Meters |
| P05 | PVDF – 1/2 in. |
| Plastic Meters |
| C10 | PVC – 1 in. |
| Plastic Meters |
| C05 | PVC – 1/2 in. |
| Metal Meters |
| B20 | Brass – 2 in. |
| Metal Meters |
| B15 | Brass – 1-1/2 in. |
| Metal Meters |
| B10 | Brass – 1 in. |
| Metal Meters |
| B07 | Brass – 3/4 in. |
| Metal Meters |
| B05 | Brass – 1/2 in. |
| Metal Meters |
| A20 | Aluminum – 2 in. |
| Metal Meters |
| A15 | Aluminum – 1-1/2 in. |
| Metal Meters |
| A10 | Aluminum – 1 in. |
| Metal Meters |
| A07 | Aluminum – 3/4 in. |
| Metal Meters |
| A05 | Aluminum – 1/2 in. |
| Metal Meters |
| H20 | Stainless Steel High Pressure – 2 in. |
| Metal Meters |
| H15 | Stainless Steel High Pressure – 1-1/2 in. |
| Metal Meters |
| H10 | Stainless Steel High Pressure – 1 in. |
| Metal Meters |
| H07 | Stainless Steel High Pressure – 3/4 in. |
| Metal Meters |
| H05 | Stainless Steel High Pressure – 1/2 in. |
| Metal Meters |
| S20 | Stainless Steel – 2 in. |
| Metal Meters |
| S15 | Stainless Steel – 1-1/2 in. |
| Metal Meters |
| S10 | Stainless Steel – 1 in. |
| Metal Meters |
| S07 | Stainless Steel – 3/4 in. |
| Table 2 | Fitting Type |
| Z | Electronics Only - for plastic meters |
| X | Electronics Only - for metal meters |
| N | NPT (Female) |
| W | Solvent Weld - available on PVC only |
| I | ISO (Female) |
| F | 150# ANSI Flange - available on S10, S15 and S20 only |
| T | Tri-Clover® Fitting - available on S05 - S20 only |
| Table 3 | Electronic Choice |
| Pulse Output (Remote) |
| 63 | Turbine Mounted Computer (Pulse Access Sensor Option) |
| Pulse Output (Remote) |
| XX | No Electronics – Turbine Only |
| Pulse Output (Remote) |
| 73 | Turbine Mounted Computer (Pulse Access Sensor Option) |
| Pulse Output (Remote) |
| 72 | Open Collector Pickup (Conditioned Signal Sensor Option) |
| Pulse Output (Remote) |
| 71 | Sine Wave Pickup (Standard Remote Sensor Option) |
| Pulse Output (Remote) |
| 62 | Open Collector Pickup (Conditioned Signal Sensor Option) |
| Pulse Output (Remote) |
| 61 | Sine Wave Pickup (Standard Remote Sensor Option) |
| Pulse Output (Remote) |
| 53 | Turbine Mounted Computer (Pulse Access Sensor Option) |
| Pulse Output (Remote) |
| 52 | Open Collector Pickup (Conditioned Signal Sensor Option) |
| Pulse Output (Remote) |
| 51 | Sine Wave Pickup (Standard Remote Sensor Option) |
| Pulse Output (Remote) |
| 43 | Remote Pulse Out Transmitter & Turbine Mounted Computer (Pulse Out Sensor Option) |
| Pulse Output (Remote) |
| 41 | Remote Pulse Out Transmitter & Sine Wave Pickup (Standard Remote Sensor Option) |
| Turbine with Local Display |
| 19 | Vertical Mount 2-Button Computer, Field Configurable (2 Totals, 2 Calibrations, Rate) |
| Turbine with Local Display |
| 09 | 2 Button Computer, Field Configurable (2 Totals, 2 Calibrations, Rate) |
| Table 2 | Calibration |
| GM | Gallons / Minute |
| LM | Litres / Minute |
| XX | No Computer |
| Table 3 | Packaging |
| A | Use for Turbine Only or Turbine w/Display (Sizes 05-10) |
| B | Use for Turbine Only or Turbine w/Display (Sizes 15-20) |
| C | Use for Turbine with Remote Transmitter With or Without |
| D | Use for 150# ANSI Flange Turbine Only (Size 10) |
| E | Use for 150# ANSI Flange Turbine Only (Sizes 15-20) |
| Fitting Type |
NPT or ISO (Female) |
| Housing Material |
316 Stainless Steel |
| Meter Sizes Available |
1/2” 3/4” 1” 1-1/2” 2” |
| Flow Range |
| 1/2” (S05) |
1 - 10 GPM (3.8 - 37.9 LPM) |
| 3/4” (S07) |
2 - 20 GPM (7.6 - 75.7 LPM) |
| 1” (S10) |
5 - 50 GPM (18.9 - 190 LPM) |
| 1-1/2” (S15) |
10 - 100 GPM (38.0 - 380 LPM) |
| 2” (S20) |
20 - 200 GPM (76 - 760 LPM) |
| Accuracy (% of Reading): |
Turbine Only Turbine w/Computer |
| 1/2” (S05) |
± 2.0% ± 1.5% |
| 3/4” (S07) |
± 1.5% ± 1.0% |
| 1” (S10) |
± 1.5% ± 1.0% |
| 1-1/2” (S15) |
± 1.0% ± 0.75% |
| 2” (S20) |
± 1.0% ± 0.75% |
| Repeatability |
± 0.1% |
| Pressure Rating |
1,500 PSI / 102 BAR |
| Operating Temperature Range |
-40°F to +250°F (-40°C to +121°C) |
| with Computer |
+14°F to +140°F (-10°C to +60°C) |
| Typical K-Factor |
| 1/2” (S05) |
2,500 |
| 3/4” (S07) |
1,100 |
| 1” (S10) |
565 |
| 1-1/2” (S15) |
215 |
| 2” (S20) |
100 |
| Wetted Materials |
| Housing |
316 Stainless Steel |
| Bearings |
Ceramic |
| Shaft |
Tungsten Carbide |
| Rotor |
PVDF |
| Rings |
316 Stainless Steel |
| Frequency Range |
| 1/2” (S05) |
42 - 420 Hz @ 1 - 10 GPM |
| 3/4” (S07) |
37 - 370 Hz @ 2 - 20 GPM |
| 1” (S10) |
47 - 470 Hz @ 5 - 50 GPM |
| 1-1/2” (S15) |
36 - 360 Hz @ 10 - 100 GPM |
| 2” (S20) |
33 - 330 Hz @ 20 - 200 GPM |
| Maximum Flow |
| 1/2” (S05) |
15 GPM (56.8 LPM) |
| 3/4” (S07) |
30 GPM (113.6 LPM) |
| 1” (S10) |
75 GPM (284 LPM) |
| 1-1/2” (S15) |
150 GPM (568 LPM) |
| 2” (S20) |
300 GPM (1,136 LPM) |
