Johnson Controls D-3240 Pneumatic Piston Damper Actuator


The D-3240 Series Pneumatic Piston Actuators are multipurpose positioning devices designed for operating inlet vanes on centrifugal fans and compressors, in direct response to the output signal of a pneumatic controller. These actuators can also be used on other applications that require a large amount of positioning power from a single actuator, such as large damper applications, provided that the damper is designed to withstand the high torque capabilities of the actuator.
• all-aluminum housing which is lightweight and non-combustible
• swivel, single pedestal or duplex pedestal mounting options for flexible mounting configurations
Select a link under the "item" tab below to order.
Cat # | Descriptions | Shipping Weight lb (kg) |
D-3244-1 | Single 8 to 13 psig (56 to 91 kPa) spring iwth D-9502-5 positioner, floor mounted damper actuator with 18 inch (457 mm) lever arm | 45.5 (20.66) |
D-3244-2 | Duplex 8 to 13 psig (56 to 91 kPa) spring with D-9502-5 positioner, floor mounted damper actuator with 18 inch (457 mm) lever arm | 62.5 (28.38) |
D-3244-3 | Single 8 to 13 psig (56 to 91 kPa) spring with D-9502-5 positioner, swivel mount bracket, clevis, and crank arm | 15.0 (6.81) |
D-3244-4 | Single 8 to 13 psig (56 to 91 kPa) spring, swivel mount bracket, clevis, and crank arm | 14.0 (6.36) |
D-3246-3 | Duplex 8 to 13 psig (56 to 91 kPa) spring with D-9502-5 positioner, floor mounted damper actuator with 18 inch (457 mm) lever arm | 75.0 (34.05) |
D-3246-1 | Single 8 to 13 psig (56 to 91 kPa) spring, swivel mount bracket, clevis, and crank arm | 15.5 (7.04) |
D-3246-2 | Single 8 to 13 psig (56 to 91 kPa) spring with D-9502-5 positioner, swivel mount bracket, clevis, and crank arm | 16.5 (7.49) |
D-3246-5 | 8 to 13 psig (56 to 91 kPa) spring with D-9502-5 positioner | 15.0 (6.81) |
Stroke | D-3244 - 4 in. (102 mm) D-3246 - 6 in. (152 mm) |
||
Mounting | D-3244 - Swivel and single or duplex pedestal D-3246 - Swivel and duplex pedestal |
||
Ambient Operating Conditions | -20 to 150°F (-29 to 66°C) | ||
Effective Diaphragm area | 23.4 in2 (151 cm2) | ||
Spring Range (nominal) | 8 to 13 psig (56 to 91 kPa) | ||
Control Air Pressure | 25 psig (175 kPa) Maximum | ||
Air Connection | 1/8 in. NPT Barbed fitting for 5/32 or 1/4 in. O.D. Polytubing |
||
Air Consumption | 2 SCIM (0.55 mL/s) Maximum | ||
Materials | Body - Die cast aluminum Diaphragm - Synthetic Elastomer |