ICON ICD-192 Single Setpoint Pneumatic Room Thermostat
Providing proportional single output, single setpoint, 1-pipe for low air capacity or 2-pipe for high air capacity pneumatic room temperature control, the 192 S Powerstar Single Setpoint Pneumatic Room Thermostat is the most economical model. Refer to the Retroline® Retrostats on page A-15 to replace competitive models.
• Single setpoint dial available in Fahrenheit or Celsius scales
• Available in direct or reverse acting models
• Sensitive bimetal responds to temperature changes
• Integral, field adjustable limit stops
• Wall mounting plate for connection to a variety of rough-in terminal boxes included
• Large volume air capacity relay in 2-pipe models only
• Test port for fast check of output pressure without removing the cover
• Field replaceable thermometer, setpoint dial, restrictor and filters for decreased maintenance cost
Select a link under the "item" tab below to order.
| Type | Models | Output | Setpoint | Type2 | Air Output Capacity | Cat # | Thermometer & Setpoint Scales | Type1 |
| Direct | 192 S 2-pipe | Single | Single (Heat or Cool) | Thermostat Chassis & Wall Plate | High (Integral Relay) | ICD192-9002 | °F | Control Action |
| Reverse | 192 S 2-pipe | Single | Single (Heat or Cool) | Thermostat Chassis & Wall Plate | High (Integral Relay) | ICD192-9003 | °F | Control Action |
| Scale/Range: | |
| Major (minor) Divisions: | 45 to 85°F, 10(2)°F (7 to 30°C, 5(1)°C) |
| Factory Calibration: | 72°F, 7.5 psi ±0.3 (22°C, 52 kPa @ 1.8) |
| Sensitivity Adjustment Range: | 1 to 4 psi/°F (12 to 50 kPa/°C) |
| Factory Setting: | 2.5 psi/°F (31 kPa/°C) |
| Limit Stop: | |
| Field Adjustment Range: | 45/85°F (7/30°C) |
| Fixed Limit Stop Range: | 55/75°F (13/24°C) |
| Temperature: | |
| Storage: | 10 to +140°F (-23 to +60°C) |
| Ambient Operating: | 40 to 140°F (4 to 60°C) |
| Accuracy at Factory: | |
| Calibration: | ±2°F (±1.1°C) |
| Response: | 0.1°F (0.06°C) |
| Supply Air Pressure: | |
| Recommended: | 25 psi (172 kPa) |
| Maximum: | 30 psi (207 kPa) |
| Nominal Air Consumption for Air Compressor Sizing: | |
| 1-pipe: | 25 scim (6.8 ml/s) |
| 2-pipe: | 20 scim (5.5 ml/s) |
| Nominal Air Capacity for Air Main Sizing: | |
| 1-pipe: | 25 scim (6.8 ml/s) |
| 2-pipe: | 20 scim (5.5 ml/s) |
| Nominal Chassis Air Capacity: | |
| 1-pipe Supply: | 25 scim (6.8 ml/s) |
| 2-pipe Supply: | 230 scim (63 ml/s) |
| 1-pipe Exhaust: | 30 scim (8 ml/s) |
| 2-pipe Exhaust: | 150 scim (41 ml/s) |
| Air Connections: | 5/32" (4 mm) OD tubing |
| Dimensions (with cover): | 2.16" W x 3.34" H x 1.59" D (55 mm W x 85 mm H x 40 mm D) |
| Shipping Weights (with cover): | |
| Thermostat Chassis and Wall Plate: | 0.53 lb. (0.24 kg) |
| Plastic Cover/Metal Cover: | 0.07 lb. (0.04 kg)/0.27 lb. (0.12 kg) |
