4 ½” Stainless Steel Case Contractor Gauge
40A
• Designed and built with the contractor in mind
• Attractively priced for use on any project where bronze internals are suitable
• Typically used for air, water, gas, oil and steam applications (a pigtail syphon should be used when putting any gauge into steam service)
Select a link under the "item" tab below to order.
| Table 1 | Table 2 | Table 3 | Table 4 | Table 5 | Table 6 |
| XX | X | X | X | XX | XXX |
| Table 1 | Dial Size |
| 45 | 4¹/₂” (114.3 mm) |
| Table 2 | Gauge Type |
| 4 | Contractor |
| Table 4 | Tube Material & Fill |
| A | Bronze Dry |
| Table 5 | Connection |
| 2L | 1/4” Lower |
| Table 6 | Range |
| VAC | 30-0” HG Vacuum |
| VAC/30 | 30” HG & 0-30 psi |
| VAC/100 | 30” HG & 0-100 psi |
| VAC/160 | 30” HG & 0-160 psi |
| 15# | 0-15 psi |
| 30# | 0-30 psi |
| 60# | 0-60 psi |
| 100# | 0-100 psi |
| 160# | 0-160 psi |
| 200# | 0-200 psi |
| 300# | 0-300 psi |
| 500# | 0-500 psi |
| Case |
Stainless Steel |
| Internals |
Bronze |
| Lens |
Plastic |
| Adjust screw on dial |
Zero |
| Numbers |
Large, easy-to-read |
| Accuracy: |
±1% Full Scale |
| Available Dial Size: |
4 1/2" |
| Available Connection Sizes: |
1/4" NPT |
| Dial Scale: |
Single Scale: PSI Standard
Other Scales By Special Request |
