Rotronic Hygro Flex 4 Transmitters For Humidity and Temperature


The new HygroFlex 4-series is the latest development in HVAC transmitters for relative humidity, temperature and dew point. Based on AirChip3000 technology, the instruments achieve a degree of accuracy not seen before.
In combination with advances in sensor technology and integration, the HygroFlex HF42-, HF43- and HF45- transmitters provide superb precision and state-of-the-art functionality, taking humidity, temperature and dew point measurements to a whole new level of performance and reliability (< 1 %rh / 0.2 K).
Practical display
• Display of the measured values on a clear, backlit graphic display with trend indicators
• Configuration by keypad possible
Tried-and-tested housing
• Robust industrial housing
• Wall or duct mount versions
Outputs
• Two freely selectable and scalable analog outputs
• 2-wire and 3/4-wire systems available
• Optional digital outputs allow integration on a network via RS485, Ethernet and even wireless connection
Fast response and precision measurement
• Integrated probe
• By decoupling the Pt100 temperature sensor from the probe, thermal response is significantly improved
• Heat from the electronic components is not transmitted to the sensors, thereby improving the accuracy of the system
AirChip3000
• Compensates humidity and temperature over 30,000 reference points
• 2,000 data point memory
• Dew/frost point calculation
• Sensor auto-diagnostics and automatic correction
• Active alarming and information
• ASIC (Application Specific Integrated Circuit), micro-controller and EEPROM on one chip
• Relative humidity, temperature and dew point measurement
• Outstanding accuracy and repeatability
• Hygromer® IN-1 humidity sensor
• Auto-diagnostics and automatic correction
• Freely selectable and scalable analog outputs
• Network compatibility with digital outputs
HF42 2-wires |
HF43 3/4-wires |
HF45 Digital |
|
Integrated sensors | Yes | ||
Humidity sensor | ROTRONIC Hygromer® IN-1 | ||
Temperature sensor | Pt100 1/3 Class B | ||
Accuracy at 23 ±5 °C | ±1.0 %rh / 0.2 K | ||
Resolution AirChip3000 | <0.02 %rh / 0.01 K | ||
Long-term stability humidity sensor | <1 %rh / year | ||
Response time t 63 | <10 s | ||
Initialization time | Typical 3 seconds | ||
Measurement range | -50…100 °C / 0…100 %rh | ||
Electronics operating range | -40…60 °C / 0…100 %rh (-10…60 °C with LCD) | ||
Display (optional) (HF42: not illuminated) |
Backlit graphic LCD Parameters freely configurable |
||
Alarm functions (programmable) | Sensor interruption or short circuit | ||
Output signals | Freely scalable by user 0...1 V, 0...5 V, 0...10 V, 0(4)...20 mA |
||
Digital outputs (optional) | Ethernet (LAN, WLAN), USB, RS485 | ||
Change in signal type U/I | HF43 only | ||
Power supply | HF42: 20...28 VDC (10 V+(0.02 x load) HF43/HF45: 15…40 VDC/12…28 VAC |
||
Power consumption | HF42: max 40 mA, other models < 100 mA LAN option <300 mA |
||
Circuit type | HF42: 2 x 2 wires, HF43: 3/4 wires | ||
Min. / Max. load | V-signal:≥1 kΩ/V / mA-signal: ≤ 500 Ω | ||
Firmware update | Possible by HW4 software | ||
Sensor diagnostics (Drift, state) | Programmable. Default: off | ||
Sensor protection | Polyethylene filter | ||
Max. wind speed | 20 m/s at probe | ||
Adjustments | By Keypad: 1 point, by ROTRONIC accessories: Humidity Multi point, Temperature 2 points | ||
Data logging function | internal, 2000 data point memory | ||
Dewpoint /frostpoint calculation | Yes | ||
PC interface | With ROTRONIC interface cable HW4 compatible | ||
Data processing by HW4 | Graphs, statistics, analyses, qualification etc. | ||
Housing material / weight | ABS / Approx. 220g | ||
Cable connections | 1 x M16x1.5, on terminals | ||
Norms | CE- compliant, 2007/108/EG | ||
Audit trail, Electronic Records | FDA CFR21 Part 11 and GAMP compliant | ||
IP protection rating & fire protection class | IP65 / Corresponds to UL94-HB |