Jump to Navigation

Schneider Electric HC-101 Series, HC-201 Two-Position Electric Controller

Two-Position Electric Controller
HC-101 Series, HC-201

These controllers provide low or line voltage on-off single stage control of humidifiers, dehumidifiers, valves, solenoid valves, compressors, relays, etc.

• SPDT switching for humidification/dehumidification.
• Agency listed room and duct units.
• Long life nylon elements.
• Standard locking feature.






Select a link under the "item" tab below to order.

Cat #DescriptionsScale Range % RHSwitch
HC-101Room10 to 905
HC-201Duct15 to 955
Control dial settings: Refer to Description Model Chart
Humidity sensing element: Nylon ribbon
Differential: Refer to Description Model Chart
Ambient temperature limits: Operating: 40 to 125°F (4 to 52°C).
Shipping and Storage: -40 to 140°F (-40 to 60°C).
Humidity: 5 to 95% RH non-condensing
Locations: NEMA Type 1
Electrical Switch: One snap-acting SPDT
Ratings: Refer to Maximum Electrical Ratings Model Chart
Connections: Color coded wire leads
HC-101: Flush or surface switch boxes or, for 24 V only, directly to wall
HC-201: In any position on the outside surface of return air duct
Dimensions: HC-101: 4-3/8 H x 2-7/8 W x 1-5/8 D in. (111 x 73 x 41 mm)
HC-201: 4-3/4 H x 6-1/2 W x 3-1/2 D in. (121 x 165 x 89 mm)
Cover: HC-1xx: Plastic. HC-2xx: Metal. CH21-1: Metal
Agency Listings: HC-101 and HC-201: UL. HC2-101 and HC-201: CSA
General Instructions: HC-101: Refer to F-15143. HC-201: Refer to F-24213


Refer to Maximum Electrical Ratings Model Chart

Main menu 2