Honeywell V4044 Line Voltage Diverting Valves
Line Voltage Diverting Valves
V4044
On-off and diverting line voltage valves consist of an actuator motor and valve assembly for controlling the flow of hot or chilled water.
• Manual opener (on all models, except straight-through, normally open valves) for valve operation on power failure; valve returns to automatic position when power is restored.
• All models may be installed without disassembling the valve.
• Compact construction for easy installation.
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system.
• Motor may be replaced without removing the valve body or draining the system.
• Suitable for heating and cooling applications.
Select a link under the "item" tab below to order.
| Cat # | Connection Type | (psi) | (inch) | (Cv) | Manual Opener | Voltage |
| V4044A1001 | Flare | 20 psi | 1/2 in. | 4 Cv | Yes | 120 Vac |
| V4044A1019 | Sweat | 20 psi | 1/2 in. | 4 Cv | Yes | 120 Vac |
| V4044A1035 | Sweat | 20 psi | 1/2 in. | 4 Cv | Yes | 208 Vac |
| V4044A1043 | Flare | 20 psi | 1/2 in. | 4 Cv | Yes | 240 Vac |
| V4044A1050 | Sweat | 20 psi | 1/2 in. | 4 Cv | Yes | 220 Vac |
| V4044A1191 | Sweat | 10 psi | 3/4 in. | 7 Cv | Yes | 120 Vac |
| V4044A1258 | Sweat | 20 psi | 1/2 in. | 4 Cv | Yes | 277 Vac |
| V4044A1290 | Sweat | 20 psi | 1/2 in. | 4 Cv | Yes | 120 Vac |
| V4044B1009 | Flare | 20 psi | 1/2 in. | 4 Cv | Yes | 120 Vac |
| V4044B1017 | Sweat | 20 psi | 1/2 in. | 4 Cv | Yes | 120 Vac |
| V4044B1314 | Sweat | 10 psi | 3/4 in. | 7 Cv | Yes | 120 Vac |
| Application: | Hydronic Control | |
| Type: | 2 position | |
| Body Pattern: |
3-Way, Diverting |
|
| Valve Action: | Spring Return to port A | |
| Power Consumption: | 9.6 VA | |
| Nominal Timing (sec, min): | 30 sec | |
| De-energized Position: | Port A Normally Closed | |
| Electrical Connections: | 18 in. leads (457 mm leads) | |
| Static Pressure: | 125 psi (862 kPa) | |
| Fluid Temperature Range: | 40 F to 200 F (5 C to 93 C) | |
| Maximum Ambient Temperature: | 125 F (52 C) | |
| Maximum Ambient Temperature: | (Body): | Brass |
| (Stem): | Stainless Steel | |
| (Seat): | Brass | |
| (Packing O-Ring): | EPDM rubber | |
| (Ball Plug): | Buna-N (NBR) Rubber Ball | |
| Comments: | Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water. Valve designed for cycling (not constantly powered on) applications. |
|
| Approvals: | Underwriters Laboratories Inc. | UL Component Listed: File MH11826 Vol. 1 |
