Honeywell Smartline Absolute Pressure Transmitters - STA800 and STA80L
STA800
Part of the SmartLine® family of products, the STA800 and STA80L are high performance absolute pressure transmitters featuring piezoresistive sensor technology combining pressure sensing with on chip temperature compensation capabilities providing high accuracy, stability and performance over a wide range of application pressures and temperatures. The SmartLine family is also fully tested and compliant with Experion® PKS providing the highest level of compatibility assurance and integration capabilities. SmartLine easily meets the most demanding application needs for pressure measurement applications.
Select a link under the "item" tab below to order.
| Table 1 | Table 2 | Table 3 | Table 4 | Table 5 | Table 6 | Table 7 | Table 8 | Table 9 |
| X | X | X | X | X | X | X | XX | X |
| Table 1 | Meter Body Selections |
| A _ _ _ _ _ | a. Process Head & Diaphragm Materials | 316L SS |
| 7 _ _ _ _ _ |
| _ 1 _ _ _ _ | b. Fill Fluid |
|
| _ _ A _ _ _ | c. Process Connection | Same as Process Head |
| _ _ D _ _ _ |
| _ _ _ 0 _ _ | d. Bolt/Nuts Materials |
|
| _ _ _ _ 0 _ | e. Vent/Drain Type/ Location | None |
| |
| Table 1 | Meter Body & Connection Orientation |
| 1 | Head/ Connection Orientation | High Side Left, Low Side Right / Std Head Orientation |
| Table 2 | Agency Approvals |
| 0 | No Approvals Required |
| A | Explosion proof, intrinsically safe, non-incendive, & dustproof |
| B | CSA Explosion proof, intrinsically safe, non-incendive, & dustproof |
| C | ATEX Explosion proof, intrinsically safe & non-incendive |
| D | IECEx Explosion proof, intrinsically safe & non-incendive |
| G | NEPSI Explosion proof, intrinsically safe & non-incendive |
| Table 3 | Transmitter Electronics Selections |
| A _ _ | a. Electronic Housing Material & Connection Type | 1/2 NPT |
| _ H _ | b. Output/ Protocol | HART Protocol |
| _ _ 0 | c. Customer Interface Selections | None |
| Table 4 | Configuration Selections |
| 1 _ _ | a. App S/W |
| _ 1 _ | b. Output Limit, Failsafe & Write Protect Settings | High> 21.0mAdc |
| _ 6 _ |
| _ _ S | c. General Config. |
| Table 2 | Calibration & Accuracy Selection |
| A | a. Accuracy & Calibration | Factory Std |
| Table 3 | Accessory Selections |
| 0 _ _ _ | b. Mounting Bracket | None |
| 6 _ _ _ |
| Customer Tag Type |
| 6 _ _ _ |
| _ 0 _ _ | No customer tag |
| 6 _ _ _ |
| _ 1 _ _ | One wired stainless steel tag (up to 4 lines 26 char/line) |
| 6 _ _ _ |
| _ 2 _ _ | Two wired stainless steel tag (up to 4 lines 26 char/line) |
| 6 _ _ _ |
| Unassembled Conduit Plugs & Adapters |
| 6 _ _ _ |
| _ _ A0 | No conduit plugs or adapters required |
| 6 _ _ _ |
| _ _ A2 | 1/2 NPT male to 3/4 NPT female 316 SS certified conduit adapter |
| 6 _ _ _ |
| _ _ A6 | 1/2 NPT 316 SS certified conduit plug |
| 6 _ _ _ |
| _ _ A7 | M20 316 SS certified conduit plug |
| 6 _ _ _ |
| _ _ A8 | Minifast® 4 pin (1/2 NPT) (not suitable for X-Proof applications) |
| 6 _ _ _ |
| _ _ A9 | Minifast® 4 pin (M20) (not suitable for X-Proof applications) |
| Table 2 | Other Certifications & Options (String in sequence comma delimited (XX, XX, XX,...) |
| Certifications & Warranty |
| FG | NACE MR0175; MR0103; ISO15156 (FC33338) Process wetted parts only |
| F7 | NACE MR0175; MR0103; ISO15156 (FC33339) Process wetted & non-wetted parts |
| MT | Marine (DNV, ABS, BV, KR, LR) (FC33340) |
| FX | EN10204 Type 3.1 Material Traceability (FC33341) |
| F3 | Certificate of Conformance (F3391) |
| F1 | Calibration Test Report & Certificate of Conformance (F3399) |
| F5 | Certificate of Origin (F0195) |
| FE | FMEDA (SIL 2/3) Certification (FC33337) |
| TP | Over-pressure leak test certificate (1.5X MAWP) (F3392) |
| OX | Cert clean for O2 or CL2 service per ASTM G93 |
| 01 | Extended warrantly additional 1 year |
| 02 | Extended warrantly additional 2 years |
| 03 | Extended warrantly additional 3 years |
| 04 | Extended warrantly additional 4 years |
| 15 | Extended warrantly additional 15 years |
| Table 3 | Manufacturing Specials |
| Factory |
| 0 0 0 0 | Factory Identification |
