Jump to Navigation

Honeywell N23 Series Non-Spring Return Direct Coupled Actuator

Non-Spring Return Direct Coupled Actuator
N23 Series

These direct coupled damper actuators provide adjustable modulating control for air dampers, VAV units, air handling units, ventilation flaps, louvers, and reliable control for air damper applications with up to 7.9 m2/85 sq ft (seal-less dampers, air friction-dependent).

Control for air damper applications with to 85 sq.ft assuming 3.5 in-lb per sq ft of damper area, velocity independent Palented self-centering shaft adapter. Access cover to facilitatte connectivity. Declutch for manual adjustment. Mechanical end limits. Field-installable auxiliary switches. Rotation direction selectable by switch. Mountable in any orientation (no IP54 if upside down). Mechanical position indicator. CE approved, UL approved.

Select a link under the "item" tab below to order.

Cat #Internal Auxiliary Switch(Nm)(lb-in.)Control SignalInput ImpedanceNominal Driving @ 60 HzDrivingFeedbackSupply Voltage
MN6134A1003037 Nm327 lb-in.Floating; Two position-95 sec9 VA, 9 W-24 Vac 15±24 Vdc
MN7234A2008040 Nm354 lb-in.(0)2-10 Vdc(4-20 mA w/500 ohm resistor)100K ohm(voltage), 500 ohm(current)95 sec8 VA, 6 W(0)2-10 Vdc (max. output: ± 1.0 mA)24 Vac 20±24 Vdc
Actuator Type: Damper; Valve
Rotational Stroke: 95 ±3 degrees
Fail Safe Mode: Non-Spring Return
Torque: 175 lb-in. (20 Nm)
External Auxiliary Switches Available: Yes, SW2-US
Electrical Connections: Enclosed screw terminal strip (22 to 14 AWG)
Environmental Rating: NEMA2; IP54
Frequency: 50 Hz; 60 Hz
Manual operation: Declutch mechanism
Mounting: Direct Coupled
Maximum Noise Rating, Driving (dBA @ 1m): 40
Rotation to Open: By switch
Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments)
Compatible Damper Shafts: 3/8 to 1.06 round or 3/8 to 11/16 square (10 to 27 round or 10 to 18 square)
Shaft Adapter Type: Self-centering clamping
Materials: Plenum rated plastic housing
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Ambient Temperature Range: -5 F to +140 F (-20 C to +60 C)
Storage Temperature Range: -40 F to +175 F (-40 C to +80 C)
Weight: 3.2 lb (1.45 kg)
Approvals:
CE: 89/336/ECC, 73/23/EEC
C-Tick: N314
Underwriters Laboratories Inc. UL873, Plenum Rated
Underwriters' Laboratories of Canada: cUL C22.2 No. 24-93
Includes: Mounting bracket, self-centering shaft adapter
Comments: Integral 1/2 in. NPSM conduit connection


Main menu 2