Jump to Navigation

Honeywell N20 Series Non-Spring Return Direct Coupled Actuator, 175 lb-in

Non-Spring Return Direct Coupled Actuator, 175 lb-in
N20 Series

These direct coupled damper actuators provide adjustable modulating control for: air dampers, VAV units, air handling units, ventilation flaps, louvers, and reliable control for air damper applications with up to 4.6 m2/50 sq ft (seal-less dampers; air friction-dependent).

• Control for air damper applications with up to 50 sq ft assuming 3.5 in-lb per sq ft of damper area, velocity independent.
• Patented self-centering shaft adapter.
• Access cover to facilitate connectivity.
• Declutch for manual adjustment.
• Mechanical end limits.
• Field-installable auxiliary switches.
• Rotation direction selectable by switch.
• Mountable in any orientation (no IP54 if upside down).
• Mechanical position indicator.
• CE approved. UL approved.

Select a link under the "item" tab below to order.

Cat #Supply VoltageNumber of Internal Auxiliary SwitchDrivingFeedbackNominal Driving @ 60 HzInput ImpedanceSwitch RatingsControl SignalProduct Note(lb-in.)(Nm)
MN6120A100224 Vac ±15%06 VA, 6 W95 secFloating; Two position*221 lb-in.25 Nm
MN6120A120024 Vac ±15%26 VA, 6 W95 sec250 Vac, 5 A res (3 A ind)Floating; Two position*221 lb-in.25 Nm
MN7220A200724 Vac ±15%06 VA, 6 W(0)2-10 Vdc (max. output: ±1.0 mA)95 sec100K ohm (voltage), 500 ohm (current)(0)2-10 Vdc (4-20 mA w/500 ohm resistor)*257 lb-in.29 Nm
MN7220A220524 Vac ±15%26 VA, 6 W(0)2-10 Vdc (max. output: ±1.0 mA)95 sec100K ohm (voltage), 500 ohm (current)250 Vac, 5 A res (3 A ind)(0)2-10 Vdc (4-20 mA w/500 ohm resistor)*257 lb-in.29 Nm
Actuator Type: Damper; Valve
Rotational Stroke: 95 ±3 degrees
Fail Safe Mode: Non-Spring Return
Torque: 175 lb-in. (20 Nm)
External Auxiliary Switches Available: Yes, SW2-US
Electrical Connections: Enclosed screw terminal strip (22 to 14 AWG)
Environmental Rating: NEMA2; IP54
Frequency: 50 Hz; 60 Hz
Manual operation: Declutch mechanism
Mounting: Direct Coupled
Maximum Noise Rating, Driving (dBA @ 1m): 40
Rotation to Open: By switch
Rotational Stroke Adjustment: Dual Integral Adj. Stops (3 degree increments)
Compatible Damper Shafts: 3/8 to 1.06 round or 3/8 to 11/16 square (10 to 27 round or 10 to 18 square)
Shaft Adapter Type: Self-centering clamping
Materials: Plenum rated plastic housing
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Ambient Temperature Range: -5 F to +140 F (-20 C to +60 C)
Storage Temperature Range: -40 F to +175 F (-40 C to +80 C)
Weight: 3.2 lb (1.45 kg)
Approvals:
CE: 89/336/ECC, 73/23/EEC
C-Tick: N314
Underwriters Laboratories Inc. UL873, Plenum Rated
Underwriters' Laboratories of Canada: cUL C22.2 No. 24-93
Includes: Mounting bracket, self-centering shaft adapter
Comments: Integral 1/2 in. NPSM conduit connection


Main menu 2