Honeywell N10 Series Non-Spring Return Direct Coupled Actuator


This non-spring return direct coupled damper actuator provides modulating and floating/2-position control for air dampers, VAV units, air handlers, ventilation flaps, louvers, and reliable control for air damper applications with up to 20 sq ft/88 lb-in. (10 Nm) (seal-less damper blades; air friction-dependent).
• Declutch for manual adjustment
• Adjustable mechanical end limits
• Removable access cover for direct wiring
• Mountable in any orientation
• Function selection switch for selecting modulating or floating/2- position control
Select a link under the "item" tab below to order.
Number of Internal Auxiliary Switch | Feedback | Cat # | Control Signal | Product Note | Supply Voltage | Nominal Driving @ 60 Hz | Switch Ratings | Driving |
0 | - | MN6110A1003 | Floating; Two position | * | 24 Vac +20%, -15%, 24 Vdc | 95 sec | - | 5 VA |
2 | - | MN6110A1201 | Floating; Two position | * | 24 Vac +20%, -15%, 24 Vdc | 95 sec | 30 Vdc max., 3 A Class II | 5 VA |
0 | (0)2-10 Vdc (max. output: ±1.0 mA) | MN7510A2001 | (0)2-10 Vdc (4-20 mA w/500 ohm resistor); Floating; Two position | * | 24 Vac +20%, -15%, 24 Vdc | 95 sec | - | 5 VA |
2 | (0)2-10 Vdc (max. output: ±1.0 mA) | MN7510A2209 | (0)2-10 Vdc (4-20 mA w/500 ohm resistor); Floating; Two position | * | 24 Vac +20%, -15%, 24 Vdc | 95 sec | 30 Vdc max., 3 A Class II | 5 VA |
Actuator Type: | Damper; Valve |
Rotational Stroke: | 95 ±3 degrees |
Fail Safe Mode: | Non-Spring Return |
Torque: | 88 lb-in. (10 Nm) |
Maximum Stall Torque: | 130 lb-in. (15 Nm) |
Electrical Connections: | Enclosed screw terminal strip (22 to 14 AWG) |
Environmental Rating: | NEMA2 |
Frequency: | 50 Hz; 60 Hz |
Manual operation: | Declutch mechanism |
Mounting: | Direct Coupled |
Maximum Noise Rating, Driving (dBA @ 1m): | 35 |
Rotation to Open: | By switch |
Rotational Stroke Adjustment: | Dual Integral Adj. Stops (3 degree increments) |
Compatible Damper Shafts: | 1/4 to 1/2 inch square; 3/8 to 5/8 inch round (6-13 mm square; 8-16 mm round) |
Shaft Adapter Type: | U-bolt clamp |
Supply Voltage: | 24 Vac +20%, -15%, 24 Vdc |
Materials: | Plenum rated plastic housing |
Ingress Protection Rating: | IP54 |
Operating Humidity Range (% RH): | 5 to 95% RH, non-condensing |
Ambient Temperature Range: | -5 F to +140 F (-20 C to +60 C) |
Storage Temperature Range: | -22 F to +176 F (-30 C to +80 C) |
Weight: | 1 lb (0.45 kg) |
Approvals: | |
CE: | 89/336/ECC, 73/23/EEC |
C-Tick: | N314 |
Underwriters Laboratories Inc. | UL873, Plenum Rated |
Underwriters' Laboratories of Canada: | cUL C22.2 No. 24-93 |
Includes: | Mounting bracket, screws, shaft adapter, water-tight strain relief cable fittings |
Comments: | Integral 1/2 in. NPSM conduit connection |