Jump to Navigation

Honeywell C7008 Flame Rod Holder

Flame Rod Holder
C7008

The small size of these devices enable their application to flame detection in installations where space is limited. The holder and flame rod assemblies facilitate flame proving on gas burners or gas-ignited oil burners which are controlled by electronic flame safeguard systems.

• Use with Honeywell Flame Safeguard controls requiring rectification type flame detection.
• Use only with gas.
• Install with or without cover.
• Comes in several different lengths and can be cut to exact desired length.
• Uses Rajah electrical connector.

Select a link under the "item" tab below to order.

Used WithMountingIncludesCat #Type
Flame Amplifiers: R7247A,B, R7847A,B, R7257, R72891/4 in. NPT male12 in. Flame rod and holderC7008A1174Flame Rod
Flame Amplifiers: R7247A,B, R7847A,B, R7257, R72891/4 in. NPT male24 in. Flame rod and holderC7008A1182Flame Rod
Flame Amplifiers: R7247A,B, R7847A,B, R7257, R7289Flame rod and holder4 in. (102 mm) flame rodC7009A1009Flame Rod
Flame Amplifiers: R7247A,B, R7847A,B, R7257, R7289Flame rod and holder12 in. (305 mm) flame rodC7009A1025Flame Rod
Description: Flame Rod Assembly
Application: Gas fired pilot or gas fired system
Dimensions, Approximate: Holder: 7/8 in. diameter x 3 3/4 in. long (Holder: 22 mm diameter x 95 mm long)
Electrical Connections: Rajah electrical connector
Approvals:
Canadian Standards Association: Certified: File No. L95329-1
Factory Mutual: Approved: Report No. 24181.03
Underwriters Laboratories Inc. Listed: File No. MP268, Guide No. MCCZ


Main menu 2