Jump to Navigation

Hancock 950 Series Forged Steel Gate Valves

Forged Steel Gate Valves
950 Series

Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.

• Two inch and smaller valves are available with threaded or socket weld ends as standard.
• Made from one piece, die-forged bodies.
• All internal surfaces are accurately machined to provide maximum performance.
• Renewable seat rings are made from hardened stainless steel, faced with Stellite.
• The wedge is forged, hardened, ground, and lapped to ensure leak free sealing.
• Fully guided wedge, precision machined body channels, for accurate, repeatable seating alignment.
• Graphite packing, complete with braided graphite filament yarn anti-extrusion rings, is standard.
• Standard body and bonnet materials are carbon steel (ASME SA105), alloy steel (ASME SA182 Gr. F11) and stainless steel (ASME SA182 Gr. F316) Trim for steel valves is 13%chrome stainless steel. 316 stainless steel valves have 316 trim.
• Code compliance with ASME/ANSI B16.34 and the ASME Boiler and Pressure Vessel Code, Section I.

Select a link under the "item" tab below to order.

Table 1Table 2Table 3Table 4Table 5
Table 1Cv
Table 2Valve Type Number
950Gate Valve, Standard Port
Table 3End Connection
SThreaded End
WSocket Weld End
Table 4Design Change Number
Table 5Material Combination Suffix
NoneA105 Body and Bonnet, 13 Cr. Trim
-445F11Body and Bonnet, 13 Cr. Trim
-535316Body, Bonnet and Trim
-1449 316Body, Bonnet and Trim (Trim is Hard-faced with Stellite)

Main menu 2