Jump to Navigation

Hancock 5525/5535 Flow Control Valves

Flow Control Valves
5525/5535

Flow control valves combination valve and flow control instrument with special micrometer and pointer to set valve within 1/100 of a handwheel turn.

• Available in Class 800 ANSI pressure classes, threaded (FNPT), and socket weld
• Micrometer dial indicator is standard equipment to ensure accurate repeatable control settings
• Valves are available with quadruple V-Port discs to ensure optimum controllability and flow
• All internal surfaces are accurately machined to provide maximum performance
• Renewable seat rings made from hardened stainless steel and faced with Stellite
• The disc is hardened, ground and lapped for accurate, leak free sealing
• Standard material is carbon steel body (ASME SA105) with 13% chrome stainless steel trim
• GRAFOIL® packing is standard
• Code compliance with ASME/ANSI B16.34 and the ASME Boiler and Pressure Vessel Code, Section I

Select a link under the "item" tab below to order.

Table 1Table 2Table 3Table 4Table 5
XXXXXXXXXXXXXX
Table 1Cv
½”1.00
¾”2.00
1”4.00
1½”10.40
2”14.00
Table 2Valve Type Number
5525T-Type, 4-V-port Disc
5535Angle Body, 4-V-port Disc
Table 3End Connection
SThreaded End
WSocket End
Table 4Design Change Number
22
Table 5Material Combination Suffix
NoneSA105 Body and Bonnet, 13 Cr. Trim


Main menu 2