Honeywell M9184 & M9194 Modutrol IV™ Series 2 Motors
Series 90 Modutrol™ IV Motors are non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves.
• Integral junction box provides NEMA 3 weather protection.
• Motor and circuitry operate from 24 Vac.
• Quick-connect terminals are standard; screw terminal adapter is available.
• Adapter bracket for matching shaft height of older motors is available.
• Motors have field adjustable stroke (90° to 160°).
• Integral auxiliary switches are available factory mounted, or can be field added.
• All models have dual shafts (slotted and tapped on both ends).
• All models have auxiliary switch cams.
• Fixed torque throughout the entire voltage range.
Select a link under the "item" tab below to order.
| Cat # | Voltage | Internal Auxiliary Switch | (lb-in., lb) | (Nm, N) | Nominal | Stroke | Shaft Rotation(upon controlsignal increase) |
| M9184A1019 | 24V | 0 | 150 lb-in. | 17 Nm | 30-60 sec | Adjustable; 90° to 160°, Asymmetrical | Clockwise (as viewed from power end) (normally closed) |
| M9184C1031 | 24V | 2 | 150 lb-in. | 17 Nm | 30-60 sec | Adjustable; 90° to 160°, Symmetrical | Clockwise (as viewed from power end) (normally closed) |
| M9184D1005 | 24V | 0 | 75 lb-in. | 8.5 Nm | 15-30 sec | Adjustable; 90° to 160°, Symmetrical | Clockwise (as viewed from power end) (normally closed) |
| M9184D1021 | 24V | 0 | 150 lb-in. | 17 Nm | 30-60 sec | Adjustable; 90° to 160°, Symmetrical | Clockwise (as viewed from power end) (normally closed) |
| M9184F1034 | 24V | 2 | 150 lb-in. | 17 Nm | 30-60 sec | Adjustable; 90° to 160°, Symmetrical | Clockwise (as viewed from power end) (normally closed) |
| M9194D1003 | 24V | 0 | 300 lb-in. | 34 Nm | 120-240 sec | Adjustable; 90° to 160°, Symmetrical | Clockwise (as viewed from power end) (normally closed) |
| M9194E1000 | 24V | 1 | 300 lb-in. | 34 Nm | 120-240 sec | Adjustable; 90° to 160°, Symmetrical | Clockwise (as viewed from power end) (normally closed) |
| Application Type: | Electric | ||
| Dimensions Diagram: | |||
| Fail Safe Mode: | Non-Spring Return | ||
| Control Signal: | Proportional, 135 ohm | ||
| External Auxiliary Switches Available: | Yes | ||
| Auxiliary Switch Ratings AFL - 120 Vac: | 7.2 A | ||
| Auxiliary Switch Ratings ALR - 120 Vac: | 43.2A | ||
| Auxiliary Switch Ratings AFL - 240 Vac: | 3.6 A | ||
| Auxiliary Switch Ratings ALR - 240 Vac: | 21.6 A | ||
| Feedback: | No | ||
| Electrical Connections: | Quick-connect terminals | ||
| Frequency: | 50 Hz; 60 Hz | ||
| Mounting: | Foot-mounted | ||
| Motor Shafts: | Dual-ended shaft | ||
| Shaft Shape: | square | ||
| Shaft Dimensions: | 0.375 in. (10 mm) | ||
| Deadweight Load on Shaft (Either End): | 200 lbs. | ||
| Deadweight Load (Combined on both Shafts): | 300 lbs. | ||
| Ambient Temperature Range: | -40 F to +150 F (-40 C to +60 C) | ||
| Weight: | 6.5 lb | ||
| Approvals: | |||
| Canadian Standards Association: | Certified: File No. LR1620, Guide No. 400-E | ||
| CE: | EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD) | ||
| Underwriters Laboratories Inc. | Listed File: E4436, Guide: XAPX | ||
