Flowline LD31/32 Series DeltaSpan™ Submersible Pressure Transmitter


The general purpose two-wire pressure transmitter is offered in two configurations for different liquid types and provides contact level measurement up to 46’ or 14m of water column. Select the LD31 for clean or relatively clean water, light weight oils and diluted chemical media. Application examples include ground water, ponds and wells. Select the LD32 for dirty, sludge or slurry media. Application examples include sewer or storm pump lift stations, storage and treatment with surface foam or debris where ultrasonic cannot be applied.
Select a link under the "item" tab below to order.
Table 1 | Table 2 | Table 3 |
XX | X | X |
Table 1 | Liquid type(1) |
31 | Water & light oil |
32 | Wastewater & slurry |
Table 2 | Cable jacket |
1 | Polyurethane |
2 | ETFE |
Table 3 | Sensor range |
0 | 0 to 5 psi (0 to 0.34 bar) |
1 | 0 to 10 psi (0 to .69 bar) |
2 | 0 to 15 psi (0 to 1.0 bar) |
3 | 0 to 20 psi (0 to 1.38 bar) |
Range | -S_01: 0 to 5 psi (0.34 bar) 0 to 11’ (0 to 3.4m) wc -S_11: 0 to 10 psi (0.69 bar) 0 to 23’ (0 to 7m) wc -S_21: 0 to 15 psi (1.0 bar) 0 to 34’ (0 to 10.4m) wc -S_31: 0 to 20 psi (1.38 bar) 0 to 46’ (0 to 14m) wc |
Accuracy | 0.25% of full span |
Supply voltage | 13-30 VDC |
Max. loop resist | 900 Ohms @ 30 VDC |
Signal output | 4-20 mA, two-wire |
Calibration | None, fixed span |
Process temp | F: 0° to 200° C: -18° to 93° |
Temp. comp. | Automatic |
Proof pressure | 2 x full span |
Burst pressure | > 35 x full span |
Process mount | 1/2” NPT |
Enclosure rating | 1/2” NPT |
Probe material | LD31: 316 SS, 316L SS & Buna-N w/PVC nose LD32: 316 SS, 316L SS & Buna-N |
Cable material | S1_1: Polyurethane S2_1: ETFE |
Cable type | 2-conductor, shielded w/vent tube |
Classification | General purpose |