Jump to Navigation

Dwyer Series RM Rate-Master® Flow Meter

Rate-Master® Flow Meter
Series RM

The Rate-Master® flowmeter line of direct reading precision flowmeters incorporates many unique user features at moderate cost. These low cost flowmeters are ideal for general use.

Easy to read design — The direct reading scales eliminate troublesome conversions. The scales are brushed aluminum, coated with epoxy and the graduations are on both sides of the indicating tube. Special integral flow guides stabilize the float throughout the range to keep it from hunting or wandering in the bore. The float is highly visible against a white background.

Construction assures accuracy — All Rate-Master® flowmeter bodies are injection molded of tough, clear, shatter-proof polycarbonate plastic around a precision tapered pin. The result is accurate and repeatable readings. The single piece plastic body is mounted to a stainless steel back bone into which pipe thread inserts are welded to absorb piping torque. Precision metering valves of brass or stainless steel (specify BV or SSV on order) are available as an optional extra and permit precise flow adjustments. For vacuum applications, Model RMA units are available with top mounted valves (specify TMV). The small Series RMA models are accurate within ±4% of full scale reading; Series RMB within ±3%; large Series RMC within ±2%.

Installation is simple — The Rate-Master® Flowmeter can be neatly panel mounted to keep flow tube centers in the same plane as the panel surface or surface mounted on the panel by means of tapped holes in the backbone. When through-panel mounted, the bezel automatically positions the instrument at the correct depth in the panel cutout. Surface mounted units can also be held in place by the piping. All mounting hardware plus installation and operating instructions are included.
Easy-to-Interchange bodies — Within a given Series Rate-Master® flowmeter bodies can be instantly interchanged. Simply “unplug” the body from backbone and replace it with another. “O” rings provide a tight seal on inlet and outlet. Piping remains undisturbed. Interchangeability is useful where different scale ranges are sometimes required at the same location in the laboratory or plant.
Cleaning is easy — To release the plastic flowmeter body from the stainless steel backbone, just remove four screws. Pipe thread flow connections remain undisturbed. Remove the slide cover and the plug ball stop, clean the flow tube with soap and water and reassemble. It’s that simple.

Select a link under the "item" tab below to order.

Cat #DescriptionsType
Model RMA-XStandard RMAModel RMA
Model RMA-X-BVRMA with Brass ValveModel RMA
Model RMA-X-SSVRMA with Stainless Steel ValveModel RMA
Model RMA-X-TMVRMA with Top Mounted ValveModel RMA
Model RMB-XStandard RMBModel RMB
Model RMB-X-BVRMB with Brass ValveModel RMB
Model RMB-X-SSVRMB with Stainless Steel ValveModel RMB
Model RMC-XStandard RMCModel RMC
Model RMC-X-BVRMC with Brass ValveModel RMC
Model RMC-X-SSVRMC with Stainless Steel ValveModel RMC
Service Compatible gases and liquids.
Wetted Materials
Body Polycarbonate
O-ring Neoprene & Buna-N
Metal Parts Stainless Steel (except for optional brass valve)
Float Stainless steel, black glass, aluminum, K monel, tungsten carbide depending on range
Temperature Limit 130°F (54°C)
Pressure Limit 100 psi (6.9 bar)
RMA 4%
RMB 3%
RMC 2% of full scale
Process Connection
RMA 1/8˝
RMB 1/4˝
RMC 1/2˝ female NPT
RMA 4 oz (113.4 g)
RMB 13 oz (368.5 g)
RMC 39 oz (1105.6 g)
Model RMA
Model RMA-X Standard RMA
Model RMA-X-BV RMA with Brass Valve
Model RMA-X-SSV RMA with Stainless Steel Valve
Model RMA-X-TMV RMA with Top Mounted Valve
Model RMB
Model RMB-X Standard RMB
Model RMB-X-BV RMB with Brass Valve
Model RMB-X-SSV RMB with Stainless Steel Valve
Model RMC
Model RMC-X Standard RMC
Model RMC-X-BV RMC with Brass Valve
Model RMC-X-SSV RMC with Stainless Steel Valve

Main menu 2