Honeywell DR4300 10” Circular Chart Recorders

10” Circular Chart Recorders

DR4300

The DR4300 Circular Chart Recorder provides one of the most cost-effective solutions for dependable pen drawn analog traces on a 10-inch (250 mm) chart.

It is easy to set up and configure to match a wide range of applications such as food processing, environmental monitoring, machine monitoring, flow, water and waste monitoring, for use on furnaces and ovens, packaging machines, and numerous other processes.

The DR4300 Recorder gives you the flexibility to tailor the recorder to match any application, from basic recording to actually doing the process control, by choosing the options that are required to accomplish your application needs. Both one- and two-pen models accept inputs from any one of a variety of sensors or transmitters within the configurable range limits. The DR4300 can be specified with a variety of options such as one or two digital controllers, a vacuum fluorescent display for viewing the process variable or configuration using English language prompts. You can also select Modbus™ communications, or choose a number of software options such as a timer function, setpoint programming, or advanced fuzzy tuning/PID control.

• Charts—Over 200 preprinted charts available to meet specific recording needs.
• Ink Cartridge—Disposable fiber-tip ink cartridge for dependable recording with minimum maintenance.
• Universal Power—Eliminates the concern with matching the local power requirements.
• Universal Inputs—Accepts 10 thermocouple types, RTDs, mA, mV or voltage inputs through simple configuration.
• Thermocouple Failsafe—Configurable upscale or down-scale burnout.
• Manual/Automatic Modes—Bumpless, balanceless transfer between control modes on advanced recorders.
• User Configurable—Allows you to set up or alter operating parameters to fit your requirements. Easily set DIP switch configuration on basic recorder.
• A Vacuum Fluorescent Display/ Keypad with English language prompts is available for more advanced recorder set up and monitoring.
• Optional Outputs—Choose from Alarm, On-Off Control, Limit Control, or versatile PID digital controller.
• Accutune II™—Provides a new, truly plug and play tuning algorithm, which will, at the touch of a button or through a digital input, accurately identify and tune any process including those with deadtime and integrating processes. This speeds up and simplifies start-up plus allows retuning at any setpoint.
• Fuzzy Logic—This new feature uses fuzzy logic to suppress process variable overshoot due to SP changes or externally induced process disturbances. It operates independently from Accutune tuning. It does not change the PID constants, but temporarily modifies the internal controller response to suppress overshoot. This allows more aggressive tuning to co-exist with smooth PV response. It can be enabled or disabled depending on the application or the control criteria.
• Individual Pen Options—Include Totalization, a Timer function, Digital Inputs, Auxiliary Output, and Setpoint Programming allowing the most flexibility to meet the application need.
• Quality/Support—The DR4300 is backed up by a toll-free phone number for technical assistance.
• CE Mark—Conformity with 73/23/EEC, Low Voltage Directive and 89/336/EEC, the EMC Directive.

Shop Now
Technical Info.
Download Specs.
Related Info.

Select a link under the "item" tab below to order.

Table 1	Table 2	Table 3	Table 4	Table 5	Table 6	Table 7	Table 8	Table 9	Table 10	Table 11	Table 12	Table 13	Table 14
XX	X	XX	XXXXXX	X	X	X	X	X	X	X	X	X	X

Table 1	PEN 2 Options
T0	Totalizer
00	No Digital Inputs
D0	Digital Inputs
00	No Totalizer Function

Table 2	Product Configuration
0	Standard Factory Configuration
1	Configuration for non-standard range settings
2	Configuration to customer’s specific data

Table 3	PEN 1 Options
00	No Totalizer Function
T0	No Totalizer Function
00	No Digital Inputs
D0	Digital Inputs

Table 4	KEY NUMBER
DR4302	Two Pen Recorder
DR4301	One Pen Recorder
DR4311	One Pen Recorder
DR4312	Two Pen Recorder
DR4321	One Pen Recorder
DR4322	Two Pen Recorder
DR4331	One Pen Recorder
DR4332	Two Pen Recorder

Table 5	Approvals
0	No Approvals
U	UL Listing
C	CSA Certification
B	UL and CSA Approval

Table 6	Certificates
0	No Certificates
1	Certificate of Conformance (F3391)
2	Certificate of Calibration (F3399)
3	Certificate of Conformance & Calibration

Table 7	Documentation
0	Product Information on CD
E	Hard Copy Product Manual

Table 8	Pen One
4	1 PID Control/Setpoint Program/Timer
G	FM Approved Limit Control/Timer Output
F	FM Approved Limit Control
A	4-20 mA Retransmission Output
5	2 Outputs (Alarm1/Timer)
3	1 PID Control with Accutune
2	2 Outputs (Alarm/On-Off Control)
0	None

Table 9	Pen Two
G	FM Approved Limit Control/Timer Output
0	None
2	2 Outputs (Alarm/On-Off Control)
3	1 PID Control
4	1 PID Control/Setpoint Program/Timer
5	2 Outputs (Alarm1/Timer)
A	4-20 mA Retransmission Output
F	FM Approved Limit Control

Table 10	Output Type Pen One
0	None
E	Electromechanical Relay
S	Solid State Relay
T	Open Collector

Table 11	Output Type Pen Two
0	None
E	Electromechanical Relay
S	Solid State Relay
T	Open Collector

Table 12	Door Options
C	Blue Door with Key Pad
G	Gray Door
B	Blue Door
H	Gray Door with Key Pad
K	Black Door
L	Black Door with Key Pad
R	Heavy Duty SST Door
K	Door Lock / Chart Plate Seal
0	None
A	Keyed Latch
B	Keyed Latch/Chart Plate Seal
E	Standard Latch/Chart Plate Seal
M	Door Lock

Table 13	Instrument Power/Transmitter Power
3	Universal Power +24VDC Transmitter Power
1	Universal Power

Table 14	Communications
C	RS 485 Modbus RTU Communication
0	None

Minimum Input Span:		Range is fully configurable within span limitation of the sensing element.
Input Impedance:		mA dc: 250 ohms Vdc: 200 K ohms RTD: 13.3 K ohms All Others: 10 Megohms
Input Filter:		Without Display: Analog with time constant of 3 seconds and digital with time constant of 1 second. With Display: Analog with time constant of 3 seconds and digital adjustable 0 seconds to 120 seconds.
Digital Displays (Optional):		Vacuum fluorescent, alphanumeric An upper four-digit display dedicated to the process variable or setpoint. Alternate information displayed during configuration. A six-digit lower display shows key selected operating parameters. Also provides guidance during configuration.
Modes of Operation:		Manual Automatic with local set point
Indicators:		Channel PV display (INP 1 or 2) Controller output (OUT 1 or 2) Temperature unit (F or C) Controller's mode (A or M) Active Setpoint [L = SP1 active; R = SP2(S2) active]
Case:		Molded, foamed-Noryl* with gasketed door to meet NEMA 3 enclosure requirements. *Registered Trademark — General Electric Co.
Pen:		Disposable fiber-tip ink cartridge, line length per cartridge more than 1000 ft (305 m) One Pen: Purple Two Pen: Purple (pen one) and red (pen two) NOTE: Only pen 1 (purple) is referenced to the chart time line.
Chart:		10.24-inch (260 mm) diameter chart with standard preprinted markings and a calibrated width of 4 inches (100 mm).
Wiring Connections:		Two piece wiring connectors inside case.
Color:		Case: Black Door: Gray (standard); Caribbean blue (optional) Window: Acrylic
Approval Bodies:		CE Mark, UL, CSA, FM Approved Limit Controller
Weight:		12 lb. (5.4 kg)
Mounting:		Panel, surface, or 2-inch pipe mounting
Tuning:		PID tuning parameters of Gain or PB, Rate, Reset.
Chart:		For Basic Recorder chart speeds set as part of configuration for 8 hours, 12 hours, 24 hours or 7 days; with Display/Keypad speeds selectable from 1 hour to 744 hours.
Sensor Burnout:		Selectable for None, Up, or Down.
Alarms:		Type: Based on PV or deviation, high or low state Hysteresis: 0 % to 100 % of input span
Transmitter Power:		24 Vdc with adjustment of ± 6 % (22.6 to 25.4) 100 mA maximum output