Johnson Controls UNT Series Unitary Controller


The Unitary (UNT) Controller is an electronic device for digital control of packaged air handling units, unit ventilators, fan coils, heat pumps, and other terminal units serving a single zone or room. It can also be configured as a generic input/output device for basic point monitoring applications when used within a Metasys Network. You can easily configure point inputs and outputs and software features to control a wide variety of HVAC equipment applications. You may use the UNT as a standalone controller or connected to the Metasys Network through a Network Control Module (NCM), N30, or Companion Supervisory Controller.
• Standalone control enhances system reliability
• Network communications over N2 bus provides facility-wide control efficiencies and cost effective sensor sharing
• Multiple modes of operation for various occupancy conditions provide comfort with economy
• Removable N2 and 24 VAC power plugs allow disconnection of an individual controller without disrupting other controller connections
• Built-in control program library within HVAC PRO software tool allows easy configuration
• Multiple packaging options for both field and factory installations allow for installation flexibility
• Isolated N2 circuitry for more reliable operation
• LED indicator for Power/Zone Bus provides visual indication of proper system function
• Screw terminals for I/O connections available in some models; “Quick Connect” lugs and crimping tool not required
• UNT112/113 include isolated binary outputs when separate power sources are used.
Product Codes | Spade quick connects: | AS-UNT110-1, AS-UNT111-1 AS-UNT112-1, AS-UNT113-1 |
Screw terminations: | AS-UNT140-1, AS-UNT141-1 | |
Ambient Operating Conditions | 0 to 60°C (32 to 140°F) and 10 to 90% RH | |
Dimensions (H x W x D) | 165 x 163 x 56 mm (6.5. x 6.4 x 2.2 in.) without enclosure 173 x 185 x 119 mm (6.8 x 7.3 x 4.7 in.) with enclosure | |
Low Ambient Temperature Models | ||
Product Codes | Spade Quick Connects: AS-UNT120-1, AS-UNT121-1 | |
Ambient Operating Conditions | -40 to 60°C (-40 to 140°F) 10 to 90% RH |
|
Dimensions (H x W x D) |
165 x 163 x 56 mm (6.5 x 6.4 x 2.2 in.) without enclosure 259 x 248 x 76 mm (10.2 x 9.8 x 3 in.) with enclosure |
|
Low Ambient Temperature Models in Enclosures | ||
Product Codes | Spade quick connects: AS-UNT110-101, AS-UNT111-101 Screw terminations: AS-UNT140-101, AS-UNT 141-101 (mounted in EN-EWC10 enclosure with 50 VA Transformer) |
|
Ambient Operating Conditions | 0 to 60°C (32 to 140°F) and 10 to 90% RH |
|
Dimensions (H x W x D) |
7 x 13 x 6 in. (180 x 330 x 150 mm without enclosure | |
All Models | ||
Ambient Storage Conditions | -40 to 70°C (-40 to 158°F) 10 to 90% RH | |
Power Requirements |
24 VAC, 50/60 Hz at 40 VA (per typical system) | |
N2 Bus | Isolated | |
Zone Bus | 8-Pin Phone Jack or Terminal Block on Controller | |
Shipping Weight | 0.64 kg (1.4 lbs) | |
Agency Compliance |
CSA C22.2 No. 205, FCC Part 15, Subpart J, Class A, IEEE 446, IEEE 472, IEEE 518, IEEE 587 Category A, UL 916, UL 864; NEMA ICS 2, Part 2-230, VDE 0871 Class B | |
Agency Listings | UL Listed and CSA Certified as part of the Metasys Network |