Jump to Navigation

Belimo GM Series Direct Coupled, Non-Spring Return Actuator, 360 in-lb Minimum Torque

Direct Coupled, Non-Spring Return Actuator, 360 in-lb Minimum Torque
GM Series

Select a link under the "item" tab below to order.

On/OffPWM adj., 0.02 to 50.0 SecondsFloating Point1Start and Span adj., Start 0.5 to 30 VDC, Span 2.5 to 32 VDC1 SPDT, 3 A (0.5 A inductive) @250VFloating Point100 VAC to 240 VACOn/Off12-10 VDC (Default) Adjustable with MFT2-10 VDC (Default) 4-20 mA (w/500 Ω Resistor)5 kΩ Resistive Feedback5 kΩ Resistive Feedback1PotentiometerCat #Motor Drive (Default)Enclosure (Part No. +N4 or +N4H) with Terminal Strip24 VAC +/- 20%, 50/60 HZ, VDC +/- 10%Wattage Running (Holding)VA Rating, Transformer SizingS1A or S2A
GMB24-31504.0 (2.0)6
GMB24-SR1504.5 (2.0)6.5
GMB24-MFT†1504.0 (2.0)7
Torque 360 in-lb [40 Nm]
minimum
Angle of Rotation 95° (adjustable with
mechanical stops)
Fits Shaft Diameter 1/2" to 1.05" (centers on
3/4" shaft with insert and
on 1' without insert)
Position Indication reflective visual indicator
(snap-on)
Manual Override external push-button
Direction of Rotation external switch
Dimensions 9.02" x 4.55" x 2.87"
[229.2 x 115.6 x 72.9 mm]
Electrical Connection 3 ft, 18 GA plenum cable,
½" conduit fitting
Overload Protection electronic throughout
rotation
Auxiliary Switch(es) add-on: 1 or 2 SPDT, 3A
(0.5A inductive) @ 250V
adjustable 5° to 85°
Housing NEMA 2/IP54, Enclosure
Type2
Agency Listings cULus according to UL
60730-1A/-2-14, CAN/CSA
E60730-1:02, CE according
to 2004/108/EC and
2006/95/EC


Main menu 2