Belimo CM Series Direct Coupled Non-Spring Return Actuator, 18 in-lb Minimum Torque
Direct Coupled Non-Spring Return Actuator, 18 in-lb Minimum Torque
CM Series
Select a link under the "item" tab below to order.
| Cat # | Motor Drive (Default) | 24 VAC +/- 20%, 50/60 HZ, VDC +/- 10% | VA Rating, Transformer Sizing | Wattage Running (Holding) | On/Off | 2-10 VDC (Default) 4-20 mA (w/500 Ω Resistor) | On/Off1 | Floating Point | Start and Span adj., Start 0.5 to 30 VDC, Span 2.5 to 32 VDC | PWM adj., 0.02 to 50.0 Seconds | Floating Point1 | 1 SPDT, 3 A (0.5 A inductive) @250V | 100 VAC to 240 VAC | 2-10 VDC (Default) Adjustable with MFT | 5 kΩ Resistive Feedback | 5 kΩ Resistive Feedback1 | S1A or S2A | Potentiometer | Enclosure (Part No. +N4 or +N4H) with Terminal Strip |
| CMB24-3 | 35 | ● | 1.5 | 1.0 (0.2) | ● | ● | |||||||||||||
| CMB24-3.1 | 35 | ● | 1.5 | 1.0 (0.2) | ● | ● | ● | ||||||||||||
| CMB120-3 | 35 | 3.5 | 1.5 (0.5) | ● | ● | ● | |||||||||||||
| CMB24-3-T | 35 | ● | 1.5 | 1.0 (0.2) | ● | ● | |||||||||||||
| CMB24-3-T.1 | 35 | ● | 1.5 | 1.0 (0.2) | ● | ● | |||||||||||||
| CMB24-SR-R | 35 | ● | 2.5 | 1.5 (0.5) | ● | ● | |||||||||||||
| CMB24-SR-L | 35 | ● | 2.5 | 1.5 (0.5) | ● | ● |
| Torque | 18 in-lb [2 Nm] minimum |
| Angle of Rotation | without end stops limitless 315° with one end stop L = clockwise rotation, R = counter clockwise rotation |
| Fits Shaft Diameter | ¼" to ½" (self-centers on 3/8" shaft) |
| Position Indication | reflective Visual Indicator (snap-on) with magnet |
| Manual Override | engages with magnet. magnet built-in to position indicator |
| Dimensions | 6.22" x 2.2" x 1.10" [158 x 56 x 28 mm] |
| Electrical Connection | 3 ft, 15 GA plenum rated cable Terminal Strip (-T) models |
| Overload Protection | electronic throughout rotation |
| Auxiliary Switch | N/A |
| Housing | NEMA 2/IP54 (NEMA 1/IP20 for -T models), Enclosure Type2 |
| Agency Listings | cULus according to UL 60730-1A/-2-14, CAN/CSA E60730-1:02, CE according to 2004/108/EC and 2006/95/EC |
