Belimo AM Series Direct Coupled, Non-Spring Return Actuator, 180 in-lb Minimum Torque

Direct Coupled, Non-Spring Return Actuator, 180 in-lb Minimum Torque
AM Series

Select a link under the "item" tab below to order.
Wattage Running (Holding) | Floating Point | Start and Span adj., Start 0.5 to 30 VDC, Span 2.5 to 32 VDC | On/Off1 | PWM adj., 0.02 to 50.0 Seconds | Floating Point1 | 2-10 VDC (Default) 4-20 mA (w/500 Ω Resistor) | 1 SPDT, 3 A (0.5 A inductive) @250V | On/Off | 100 VAC to 240 VAC | 2-10 VDC (Default) Adjustable with MFT | 5 kΩ Resistive Feedback | Cat # | 5 kΩ Resistive Feedback1 | Enclosure (Part No. +N4 or +N4H) with Terminal Strip | S1A or S2A | 24 VAC +/- 20%, 50/60 HZ, VDC +/- 10% | Motor Drive (Default) | VA Rating, Transformer Sizing | Potentiometer |
2.5 (0.4) | ● | ● | AMB24-3 | ● | ● | ● | 95 | 5.5 | ● | ||||||||||
2.5 (0.4) | ● | ● | ● | AMB24-3-S | ● | ● | 95 | 5.5 | ● | ||||||||||
2.5 (0.4) | ● | ● | AMB24-SR | ● | ● | ● | 95 | 5 | ● | ||||||||||
3.5 (1.3) | ● | ● | ● | ● | ● | ● | AMB24-MFT | ● | ● | 150 | 6 | ● |
Torque | 180 in-lb [20 Nm] minimum |
Angle of Rotation | 95° (adjustable with mechanical stops) |
Fits Shaft Diameter | ½" to 1.05" (centers on ½"and ¾" shafts with insert and 1.05" without insert) |
Position Indication | reflective visual indicator (snap-on) |
Manual Override | external push-button |
Direction of Rotation | external switch |
Dimensions | 7.47" x 3.46" x 2.49" [189.8 x 88 x 64 mm] |
Electrical Connection | 3 ft, 18 GA plenum cable, 1/2" conduit fitting |
Overload Protection | electronic throughout rotation |
Auxiliary Switch(es) | (-S) Models: 1 SPDT, 3A (0.5A inductive) @ 250 V adjustable 5° to 85°, Add-on: 1 or 2 SPDT, 3A (0.5 A inductive) @ 250V one switch adjustable 25° to 85° |
Housing | NEMA 2/IP54 (NEMA 1/IP20 for -T models), Enclosure Type2 |
Agency Listings | cULus according to UL 60730-1A/-2-14, CAN/CSA E60730-1:02, CE according to 2004/108/EC and 2006/95/EC |