PURGEMASTER® 5 Inch Scale Flow Meter
Series 10A6132
The Bailey-Fischer & Porter PURGEMASTER® 5 inch scale purgemeters are low capacity variable-area flowmeters for both liquid and gas with a nominal accuracy ±2% of full scale. The meter features a corrosion resistant stainless steel body and is available with or without a built in control valve. Other features include a quick, easy snap-in tube construction, and a safety tested operator protection shield. Units available with direct reading scales for a wide range of air or water flows or with millimeter reference scales for use with flow curves for any fluid.
Select a link under the "item" tab below to order.
| Table 1 | Table 2 | Table 3 | Table 4 | Table 5 | Table 6 | Table 7 |
| XXXXXXX | X | X | X | X | X | X |
| Table 1 | Flowmeter |
| 10A6132 | 10A6132 |
| Table 2 | Scales |
| B | Direct Reading (standard Scales listed in Spec. Sheet) |
| D | Millimeter |
| Table 3 | Valve Location |
| A | Without Valve |
| M | Outlet Valve, Std Capacity |
| N | Inlet Valve, Std Capacity |
| Table 4 | Tube size(Diameter) |
| 1 | 1/8” |
| 2 | 1/4” |
| Table 5 | Materials of Construction |
| B | 316 SS/Viton/SS |
| C | Brass/Buna/Kynar |
| D | Kynar/Viton/Kynar* |
| Table 6 | Mounting (Meter & Regulator) |
| 1 | In-line(Pipe) |
| 2 | Wall Mount |
| 3 | Rear Panel Mount |
| 4 | Front Panel Mount |
| Table 7 | Regulator |
| X | No Regulator |
| A | Stainless Stell |
| B | Brass |
