Jump to Navigation

Yokogawa CA11E Handy Calibrator

Handy Calibrator
CA11E

Voltage Calibrator - Current Calibrator Signal source: DCV (Max. 30V), DCA (Max. 24 mA)
Measurement: DCV (Max. 30V), DCA (Max. 100 mA)
Options: CA11E-2 Includes rubber boot, strap and accessory case

Source and Measuring of Voltage and Current- Generates and measures voltages up to 30 V DC and currents up to 24 mA DC.
Improved display resolution for current- The generation/measurement resolution has improved to 0.001 mA.
24 V (20 mA)/Loop check function- Enables measurement of generated current signals while supplying loop power to two-wire transmitter.
20 mA SINK Function- Absorbs the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter making it ideal for loop checks.
20 mA SINK Function- Absorbs the voltage supplied from an external power supply to its H terminal and simulates a two-wire transmitter making it ideal for loop checks.

Power supply Four 1.5-V alkaline batteries (ANSI AA-size) or dedicated AC adapter (sold separately)
Life of Batteries Approximately 50 hours for 5 V DC output (with a load of 10kΩ or greater) Approximately 25 hours for 20 mA DC output (with a load of 5 V)
Automatic Power-off Approximately 10 minutes (Can be canceled by DIP switch setting)
Generation Signal By four-digit up/down keys
Level Setting Response of generator Approximately 1 second (from when the output begins to change until when the output level falls within the specified accuracy)
Maximum Allowable 30 VDC or less between each terminal and ground
Measurement display Approximately 1 update/sec.
update interval
Display
7 segments LCD
Operating temperature/ humidity range 0 to 50°C and 20 to 85%RH (no condensation)
Storage temperature/ humidity range -20 to 50°C and 90%RH or less (no condensation)
Dimensions Approximately 192 (W) 92 (H) 42 (D) mm (Excluding protrusions)
Weight Approximately 440 g (including batteries)
Accessories Lead cable


Main menu 2