Jump to Navigation

Schneider Electric MP-52xx Series Electronic Hydraulic Actuator

Electronic Hydraulic Actuator
MP-52xx Series

These actuators provide electronic proportional control of dampers, valves, or program switches requiring the return to normal position upon power interruption.

• Compatibility with 2 to 15 Vdc System 8000 input signals.
• Proportional control by variable Vdc input signal.
• Spring return.
• Fixed 3 Vdc operating span.
• Non-adjustable start point and non-positive positioning. Typically, one actuator is controlled from one Vdc output signal.
• 10,000

Select a link under the "item" tab below to order.

Cat #Voltage (±10%)WattsVATo ExtendTo RetractRetract on Power LossTorque Rating lb-in. (N-m)
MP-523012010186040151.86 (0.21)
MP-52332410186040151.86 (0.21)
Actuator inputs:
Compatible with: 2 to 15 Vdc from TAC System 8000 controllers
Operating span: Approximately 3 Vdc fixed on damper. See F26235-2 for valves Start point: Approximately 6 Vdc fixed. See F-26235-2 for valves Impedance: 10,000Ω or greater
Power input: Refer to Damper Actuator Model Chart, and Valve Actuator Model Chart
Connections: Color coded 4 ft. (1.2 m) leads
Actuator outputs:
Electrical: Internal power supply: 20 Vdc, 25 mA
Auxiliary switch (MP-52XX-500): 10 amps, 120/240 Vdc adjustable SPDT, factory set to close N.C. contact at retracted end of stroke
Mechanical: Stroke, Damper: Approximately 2 in. (51 mm) over a nominal 6 Vdc (fully retracted) to 9 Vdc (fully extended) input range. Includes AM-601 linkage
Stroke, Valve: Approximately 9/16 in. (14 mm) over a nominal 6 Vdc (fully retracted) to 9 Vdc (fully extended) input range
Nominal damper area: Actuator sizing should be done in accordance with damper manufacturer’s specifications
Environment:
Ambient temperature limits: Shipping and handling: -40 to 140°F (-40 to 60°C)
Operating: -20 to 140°F (-29 to 60°C) for damper actuators
For valve actuators, refer to Maximum Allowable Ambient Air Temperature for Valve Actuators
Humidity: 5 to 95% RH, non-condensing
Location: NEMA Type 1
Dimensions: 6-3/4 H x 3-1/4 W in. (171 x 83 mm)
Agency Listings:
UL: File E9429 Temperature Indicating and Regulating Equipment
CUL: Canadian Standard C22.2 #24-93
European Community: EMC Directive 89/336/EEC, Low Voltage Directive 72/23/EEC
General Instructions: Refer to F-24789

 

 

Valve Actuators



Main menu 2