Jump to Navigation

Schneider Electric MP-52xx Series Electronic Hydraulic Actuator

Electronic Hydraulic Actuator
MP-52xx Series

These actuators provide electronic proportional control of dampers, valves, or program switches requiring the return to normal position upon power interruption.

• Compatibility with 2 to 15 Vdc TAC System 8000 input signals.
• Proportional control by variable Vdc input signal.
• Spring return.
• Fixed 3 Vdc operating span.
• Non-adjustable start point and non-positive positioning. Typically, one actuator is controlled from one Vdc output signal.
• 10,000 Ω or greater input impedance.
• 24, 120, and, 240 Vac models.
• Damper models with linkage or base models requiring separate damper or valve linkage available.
• Die cast lower housing with 1/2 in. (12.7 mm) conduit opening and painted steel upper housing.
• Hydraulic actuator with oil-immersed motor, transducer, and pump.

Select a link under the "item" tab below to order.

Cat #TypeVoltage (±10%)WattsVATo ExtendTo RetractRetract on Power LossTorque Rating lb-in. (N-m)
MP-5230Damper Actuators.12010186040151.86 (0.21)
MP-5233Damper Actuators.12010186040151.86 (0.21)


Main menu 2