Jump to Navigation

Schneider Electric A25X Receiver Gauges

Receiver Gauges
A25X

Receiver gauges for continuous indication of temperature, differential static pressure, differential pressure, pressure, enthalpy, or humidity in conjunction with a transmitter-receiver system. Select “donut” type dials listed for required application.

• Receiver-gauges receive output signals of pneumatic transmitters and provide readout of measured (and/or controlled) variables at convenient locations.
• Gauge dials available to match each pneumatic transmitter range.
• 2 in. model available for stem mounting.
• 2-1/2 and 3-1/2 in. models available for flush mounting.

Select a link under the "item" tab below to order.

Cat #MountingAir ConnectionsWholesale Model NoDial Size In.PointerConstruction and Finish
A251-1Flush with “U” clamp for panels1/8 in. -27 MNPT center back2422-001a b2-1/2AdjustableBlack plastic case
A252Flush with “U” clamp for panels1/8 in. -27 MNPT center back2422-002a c3-1/2AdjustableZinc plated steel case with chrome plated snap-out ring
A253-12Stem2422-003a d2Black plastic case
Air pressure: 3 to 15 psig (21 to 103 kPa)
Construction:
Case: Refer to Model Chart
Lens: Clear plastic
Gauge actuation: Bronze Bourdon tube through sturdy brass gears
Gauge dimensions:
A251-1: 2-29/32 (74 mm) dia. x 2-1/2 (64 mm) D in.
A252: 4 (102 mm) dia. x 2-1/2 (64 mm) D in.
A252-12: 2-15/64 (57 mm) dia. x 1-53/64 (46 mm) D in.


Main menu 2

about seo