Jump to Navigation

WE Anderson Series L10 FLOTECH ® Mini-Size Level Switch

FLOTECH ® Mini-Size Level Switch
Series L10

The Mini-Size Series L10 Flotect® Level Switches combine low cost with top quality materials and construction for great value and years of reliable liquid level control. Wide media compatibility is assured with a choice of brass or stainless steel bodies and external tees; polypropylene or stainless steel floats. Two basic configurations are offered; with 1 male NPT threads for direct side mounting through a half coupling or with factory installed tee for external mounting.

All Series L10 switches feature a hermetically sealed, magnetically actuated SPST reed switch which is encapsulated in a polypropylene housing. Units are quickly and easily adjusted for your choice of normally open or normally closed operation thanks to a unique patented design. Just loosen two screws and instantly slide the switch assembly to the action required. N.O. and N.C. markings are clearly visible. This feature also speeds switch replacement if damage occurs.

Three types of floats are offered to accommodate liquids with specific gravities as low as 0.5; maximum pressures to 2000 psig (137.8 bar).Wire leads are 22 AWG x 18 (460 mm) and exit the switch assembly through 1/8˝ male NPT threads. These controls are UL recognized and CSA listed.

Select a link under the "item" tab below to order.

Cat #Float MaterialBody Material.Installation/MountingMax.Pressure psig(bar)Min.S.G.
L10-B-3-OPolypropylene SphericalBrassSide Wall Mounting1000 (69)0.9
L10-B-3-A304 SS CylindricalBrassSide Wall Mounting200(13.8)0.5
L10-B-3-C304 SS SphericalBrassSide Wall Mounting350(24.1)0.7
L10-B-3-BPolypropylene SphericalBrassBrass External Float Chamber(Tee)250(17.2)0.9
L10-B-3-H304 SS SphericalBrassBrass External Float Chamber(Tee)250(17.2)0.7
L10-S-3-OPolypropylene Spherical303 SSSide Wall Mounting2000(137.8)0.9
L10-S-3-A304 SS Cylindrical303 SSSide Wall Mounting200(13.8)0.5
L10-S-3-C304 SS Spherical303 SSSide Wall Mounting350(24.1)0.7
L10-S-3-SPolypropylene Spherical303 SS304 SSExternal FloatChamber(Tee)2000(137.8)0.9
L10-S-3-L304 SS Spherical303 SS304 SSExternal FloatChamber(Tee)350(24.1)0.7
Service Compatible liquids
Wetted Materials
Float Solid Polypropylene or 304 SS
Body Brass or 303 SS
Magnet Ceramic
External Float Chamber (Tee) None, Brass, or 304 SS
Other Lever Arm, Pin, Spring, etc.: 301 SS
Temperature Limit 200°F (93°C)
Pressure Limit See chart below
Switch Type SPST hermetically sealed reed switch. Field adjustable for normally open or normally closed
Electrical Rating 1.5A @ 24 VDC resistive, 0.001A @ 200 VDC resistive, 0.5A @ 125 VAC
Electrical Connections 22 AWG, 18˝ (460 mm) long
Conduit Connection 1/8˝ male NPT
Process Connection 1˝ male NPT standard on models without external float chamber. Change 3 in model number to 4 for 1-1/4˝, to 5 for 1-1/2˝, or 6 for 2˝. 1˝ female NPT on models with external float chamber
Mounting Orientation Horizontal with index arrow pointing down
Weight Approximately 9 oz (0.255 kg) without external float chamber, 2.25 lb (1.02 kg) with external float chamber
Specific Gravity See chart below
Agency Approvals UL and CSA
Switch Enclosure Polypropylene



Main menu 2

about seo