Jump to Navigation

Johnson Controls D-3153 Pneumatic Actuator

Pneumatic Actuator

The D-3153 Pneumatic Actuator is a multipurpose positioning device used primarily for operating ventilating dampers in response to the output signals of a pneumatic controller or electro-pneumatic transducer. The D-3153 can be used with dampers up to a maximum area of 16 square feet for proportional volume control and 25 square feet for two position actuation provided that the torque requirements are compatible with the specific application. The D-3153 is UL component recognized for use on UL classified 555/555S smoke and combination fire/smoke dampers which have been tested and approved to a degradation temperature of 250°F (121°C).

• All-aluminum Housing
• Telescoping Linkage
• Long Life and Reliable
• 2-way Swivel Head
• Agency Recognized

Select a link under the "item" tab below to order.

Cat #TypeNominal Spring Range
D-3153-1With Universal Mounting Bracket8-13 w/D-9502
D-3153-2With Universal Mounting Bracket8-13
D-3153-3With Universal Mounting Bracket5-10
D-3153-4With Auxiliary Mounting Bracket8-13 w/D-9502
D-3153-18With Auxiliary Mounting Bracket0-3 and 9-13 w/2-stage Pilot
D-3153-5With Auxiliary Mounting Bracket8-13
D-3153-6With Auxiliary Mounting Bracket5-10
D-3153-6003Body Only8-13
D-3153-6002Body Only5-10
D-3153-7Body Only3-7
Product D-3153 Pneumatic Actuators
Stroke 3 inches (76 mm)
Control Air Pressure 0-20 psig for HVAC
20 psig (137 kPa) minimum for safety damper functions
30 psig (205 kPa) maximum w/o pilot
Air Connections 1/8 inch NPT straight barbed fitting for 5/32 or 1/4 inch O.D. polytubing (furnished) compression fitting for 1/4 inch O.D. copper tubing (optional)
Ambient Operating Conditions -20 to 150°F (-29 to 66°C)
Effective Diaphragm Area 15 inch2 (97 cm2)
Materials Body - Die-cast Aluminum, Diaphragm - Synthetic elastomer
Shipping Weight, lb (Kg) D-3153-1 11.5 (5.2) D-3153-3 10.0 (4.5) D-3153-5 8.5 (3.9) D-3153-7 8.5 (3.9)
D-3153-2 10.0 (4.5) D-3153-4 10.5 (4.8) D-3153-6 8.5 (3.9) D-3153-18 10.5 (4.8)
Agency Listing UL Recognized component to 250°F (121°C) with compression fitting for copper tubing
File No. R15581
D-3153-42 and D-3153-43 ULC Listed

Main menu 2

about seo