Jump to Navigation

Honeywell WBR/WBH Series XYR 5000 Wireless Base Radio

XYR 5000 Wireless Base Radio
WBR/WBH Series

The Wireless Base Radio (WBR) is part of the XYR 5000 family of wireless products. It combines an RF transceiver and the interface to a SCADA, DCS, or data acquisition device. The WBR Radio Frequency (RF) transceiver communicates in a digital protocol, using Frequency Hopping Spread Spectrum (FHSS). FHSS ensures data integrity by continually switching the carrier wave over a wide range of frequencies.

Each Wireless Base Radio can communicate with up to 100 field units. As part of its diagnostic capability, the Wireless Base Radio can identify and report field unit out of spec conditions, and low battery alarms. Multiple outputs are available. The Wireless Base Radio is easily configured using the local pushbuttons and display.

• Improve Product Quality
• Ensure High Uptime
• Reduce Maintenance and Operational Costs
• Meet Regulatory Requirements
• Enhance Flexibility

Select a link under the "item" tab below to order.

Table 1Table 2Table 3Table 4Table 5Table 6
XXXXXXXXXXXXX
Table 1KEY NUMBER
WBRWireless Base Radio (Dual Output) with Omni Directional Antenna
WBHWireless Base Radio (Dual Output) with High Gain Antenna
Table 2GATEWAY OPTIONS
00No Selection
G1Basic Wireless Gateway Package for TDC/TPS includes:
- XYR SI-FTA card with embedded TDC/TPS firmware
- 30 cm Power Adapter Card to XYR SI-FTA cable
- XYR Configurator and documents in CD-ROM
G2Extended Wireless Gateway Package for TDC/TPS includes:
- XYR SI-FTA card with embedded TDC/TPS firmware b
- 30 cm Power Adapter Card to XYR SI-FTA cable
- XYR Configurator and documents in CD-ROM
- SI-IOP Serial Interface Card For TDC/TPS
- Power Adapter Card used with XYR SI-FTA
- 5 meters SI-IOP to XYR SI-FTA Cable
Table 3OPTIONS
MB2” Pipe Mounting Bracket
PW120/240 VAC to 24 VDC 15 W DIN Rail Mounted Power Supply
RSRS-485 to RS-232 Din Rail Converter kit
Pricing Table IDIN Rail Mounted Quad 4-20 mA Output Module
Pricing Table 2DIN Rail Mounted Discrete Output Module (8 switch outputs) *
Pricing Table 3DIN Rail Mounted Combined Analog/Discrete Output module (4 analog outputs and 8 digital switch outputs) *
XXNo Options
MB2” Pipe Mounting Bracket
PW120/240 VAC to 24 VDC 15 W DIN Rail Mounted Power Supply
RSRS-485 to RS-232 Din Rail Converter kit
Pricing Table IDIN Rail Mounted Quad 4-20 mA Output Module
Pricing Table 2DIN Rail Mounted Discrete Output Module (8 switch outputs) *
Pricing Table 3DIN Rail Mounted Combined Analog/Discrete Output module (4 analog outputs and 8 digital switch outputs) *
XXNo Options
Table 4Pricing Table 1
A14 Analog Outputs
A28 Analog Outputs
A312 Analog Outputs
A416 Analog Outputs
A520 Analog Outputs
A624 Analog Outputs
A728 Analog Outputs
A832 Analog Outputs
A936 Analog Outputs
AA40 Analog Outputs
AB44 Analog Outputs
AC48 Analog Outputs
Table 5Pricing Table 2
B18 Discrete Outputs
B216 Discrete Outputs
B324 Discrete Outputs
B432 Discrete Outputs
B540 Discrete Outputs
B648 Discrete Outputs
B756 Discrete Outputs
B864 Discrete Outputs
B972 Discrete Outputs
BA80 Discrete Outputs
BB88 Discrete Outputs
BC96 Discrete Outputs
Table 6CERTIFICATION OPTIONS
9XNo hazardous location approvals
AKCombined FM & CSA
3DATEX*
3XCE
Wireless Communication: 902 MHz – 928 MHz Frequency Hopping Spread Spectrum (FHSS)
FCC certifi ed ISM license-free band
Every data block transmitted is verifi ed (CRC check) and acknowledged by the Base Radio
RF Transmit Power: 31 mW, 17.8 mW typical
Data Rate: Confi gurable: 4.8 Kbps, 19.2 Kbps, or 76.8 Kbps
Scan Rate: 20 seconds @ 4.8 Kbps, 5 seconds @ 19.2 Kbps, 1.4 seconds @ 76.8 Kbps
Antenna: External 3” omni-directional, ½ wave, dipole. Remote High Gain Omnidirectional:
   

• Available by itself, or with a lightening suppressor and 10 or 25 feet of cable
• Length: 65”
• Gain: 6 dBd (less cable loss ≈ 0.04 dBm/ft)
• Weight: 6 lbs.
• Polarization: Vertical
• Material: Precision copper clad radiators enclosed in high density fiberglass, UV protected
• Mounting: Heavy wall gold anodized 1 ¼” aluminum with brackets. Base Radio coaxial cable

  Base Radio coaxial cable
• Factory installed coax cable in 10 of 25 foot lengths
• RG Type 8/U, Series Type RF 400, 10 AWG
Signal Range: Up to 2000 feet (600 meters) from Base Radio with clear line of sight* Up to 5000 feet (1500 meters) from Base Radio with clear line of sight*
Electronic Housing: Baked enamel aluminum housing  
Conduit Connection: 3/4”-NPTF  
Net Weight: 2.5 kgs (5 lbs)  
Mounting: Wall mount standard, or 2” pipe mounting bracket optional  

*Actual range may vary depending on site topography. Yagi antenna option on field unit will increase signal range.



Main menu 2