Jump to Navigation

Honeywell STDW900 Series XYR 6000 Wireless Pressure Transmitter

XYR 6000 Wireless Pressure Transmitter
STDW900 Series

Building upon the tremendously successful ST 3000 series transmitter line; Honeywell brings simple, safe, and secure wireless technology to its measurement portfolio in the XYR 6000 Series Wireless Transmitters.

The XYR 6000 series measurements are part of the Honeywell One Wireless system and are ISA100 - ready field devices. Measurement and information without wires! The XYR 6000 wireless transmitters series enable customers to obtain data and create information from remote and hazardous measurement locations without the need to run wires, where running wire is cost prohibitive and/or the measurement is in a hazardous location. Without wires, transmitters can be installed and operational in minutes, quickly providing information back to your system. XYR 6000 wireless transmitters send information to a multinode or series of multinodes creating a MESH infrastructure.

Wireless System Gateways (WSG) provide the path to bring that information into Experion PKS or any other control system wirelessly via OPC client or Modbus-TCP. Each multinode accepts signals from up to 20 wireless transmitters reporting at 1 second, and up to 100 transmitters reporting at slower rates. Up to 22 multinodes can be implemented in the same infrastructure. WSG also provides Modbus-TCP data access to wireless data in addition to OPC. Transmitter power is supplied by two “D” size lithium batteries with an expected lifetime of up to ten years. Transmitter range with the integral antenna is 1000’ (305 m) under ideal conditions. Pressure transmitters continue to bring a proven technology to a wide spectrum of pressure measurement applications, from furnace combustion airflow rate to hydrostatic tank gauging. The STDW series Differential Pressure can be used with any primary flow element to provide proven, repeatable flow measurement.

• Measure remote access points simply, safe and securely
• Obtain and utilize previously inaccessible information due to high wiring cost or hazardous locations.
• Easily meet Regulatory Requirements
• Improve process efficiency
• Enhance Flexibility to monitor applications:
  - that have no access to power
  - that are remote or difficult to reach
  - that may require frequent reconfiguration
  - where manual readings have been required previously.

Select a link under the "item" tab below to order.

Cat #DescriptionsType
STDW9240-10” to 0-400”H2O/0-25 to 0-1000 mbar Body Rating: 4500 psi (310 bar)Differential Pressure
STDW9300-5 to 0-100 psi/0-0.34 to0-7 bar Body Rating: 4500 psi (310 bar)Differential Pressure
STDW9740-100 to 0-3000 psi/0-7 to 0-210 bar Body Rating: 4500 psi (310 bar)Differential Pressure
Parameter Description
Wireless
Communication:

2,400 to 2,483.5 MHz (2.4 GHz) Industrial, Scientific and Medical (ISM) band

FHSS Selection – Frequency Hopping Spread Spectrum
DSSS Selection – Discrete Sequential Spread Spectrum per FCC 15.247 / IEEE 802.15.4–2006

Every data packet transmitted in either direction is verified (CRC check) and acknowledged by the receiving device.

USA – FCC Certified
Canada – IC Certified
European Union – RTTE/ETSI Conformity

FHSS RF  Transmitter
Power:

NA Selection – 125 mW (20.9 dBm) maximum transmit power not including antenna per FCC/IC, or 400 mW (26.0 dBm) maximum EIRP including antenna for USA and Canadian locations.

EU Selection – 100 mW (20.0 dBm) maximum EIRP including antenna per RTTE/ETSI for EU locations.

DSSS RF  Transmitter
Power:

NA Selection – 125 mW (20.9 dBm) maximum transmit power not including antenna per FCC/IC, or 400 mW (26.0 dBm) maximum EIRP including antenna for USA and Canadian locations.

EU Selection – 10 mW (10.0 dBm) maximum EIRP including antenna per RTTE/ETSI for EU locations.

Data: PV Publish Cycle Time: Configurable as 1, 5, 10 or 30 seconds
Rate: 250 Kbps
Antennas: Integral – 2 dBi omnidirectional monopole
Integral – 4 dBi omnidirectional monopole
Remote – 8 dBi omnidirectional monopole with up to 20 m cable and lightning surge arrester
Remote – 14 dBi directional parabolic with up to 20 m cable and lightning surge arrester
Signal Range: Nominal 305 m (1,000 feet) between Field Transmitter and Infrastructure Unit (Multinode) or Gateway Unit when using 2 dBi Integral antenna with a clear line of sight.


Main menu 2

about seo