Jump to Navigation

Honeywell RP913 Pneumatic Load Analyzer

Pneumatic Load Analyzer
RP913

A diaphragm logic pressure selector selects the highest and/or lowest branch pressure input from zone thermostats to operate final control elements in pneumatic control applications. Replacement devices are available for Johnson, Powers, Robertshaw, and Barber-Colman devices.

• Seven input manifold containing logic diaphragm, air filter, and restrictions.
• Ten sharp barb connectors for all piping requirements.
• Large integral filter assures clean air to the manifold.
• Requires no field adjustment, and plastic construction results in minimum maintenance.
• Two analyzers can be connected together to increase inputs to twelve.

Select a link under the "item" tab below to order.

Cat #Descriptions
RP913A1008Wall, In-Line or Panel Mounted Load Analyzer Relay, 7 input
Type: Load Analyzer Relay, 7 input
Dimensions, Approximate: 3/4 in. high x 6 1/2 in. long x 2 1/16 in. deep (19 mm high x 165 mm long x 52 mm deep)
Mounting: Wall or In-line or panel
Airflow Usage: 0.04 scfm (0.019 mL/s)
Air Connections: Barb fittings (10) for 1/4 in. (6 mm) O.D. plastic tubing
Capacity: 0.039 scfm at 1 psi differential (18 mL/s at 5 kPa differential)
Operating Humidity Range: 5 to 95% RH
Temperature Range: 0 F to 140 F (-18 C to +60 C)
Maximum Safe Operating Pressure: 25 psi (172 kPa)


Main menu 2