Jump to Navigation

Honeywell MP909D Pneumatic Damper Actuator

Pneumatic Damper Actuator
MP909D

Used for pneumatic proportional control of variable volume terminal units and small damper. Available in various operating ranges for either individual or sequence operation with other actuators. Replacement devices are available for Johnson, Powers, Robertshaw, and older Honeywell actuator models.

• Rugged ribbed aluminum body.
• Low-friction shaft bearing.
• Close tolerance on operating range and stroke.
• Protected barb connector.
• Versatile mounting and connecting hardware options.
• Positive leakproof seal.

Select a link under the "item" tab below to order.

Cat #Includes(inch)(mm)(psi)(kPa)Air Connections
MP909D1201Actuator only. 3/8 in.-16 Threaded Shaft. No Mounting Bracket or Ball Joint2.4 in.61 mm3 psi to 8 psi21 kPa to 55 kPaBarbed fitting for 3/32 in. O.D. tubing
MP909D1219Actuator only. 3/8 in.-16 Threaded Shaft. No Mounting Bracket or Ball Joint2.4 in.61 mm8 psi to 13 psi55 kPa to 90 kPaBarbed fitting for 3/32 in. O.D. tubing
MP909D1227Actuator only. 3/8 in.-16 Threaded Shaft. No Mounting Bracket or Ball Joint2.4 in.61 mm5 psi to 10 psi34 kPa to 69 kPaBarbed fitting for 3/32 in. O.D. tubing
MP909D1441Small clevis on shaft. No mounting bracket or ball joint3 in.76 mm5 psi to 10 psi5 psi to 10 psi34 kPa to 69 kPaBarbed fitting for 3/32 in. O.D. tubing
Actuator Type: Damper
Actuator Force: Low
Fail Safe Mode: Spring Return
Air Connections: Barbed fitting for 3/32 in. O.D. tubing
Stroke: 2.4 in. (61 mm)
Diaphragm Effective Area: 3 sq in. (19.4 sq cm)
Temperature Range: 50 F to 140 F (10 C to 60 C)
Maximum Operating Pressure: 30 psi (207 kPa)
Humidity Range: 5 to 95% RH
Approvals:
Underwriters Laboratories Inc. Components Recognized: Report
R18118


Main menu 2

about seo