Jump to Navigation

Honeywell DPR 180 180mm Strip Chart Recorders

180mm Strip Chart Recorders
DPR 180

The DPR180 recorder offers the best price/performance in the market today of any 180mm (7 inch) wide chart recorder.

The recorder is able to monitor up to 24 analogue inputs and up to 36 digital inputs.

It produces clear, fully documented charts at any speed, and in different formats, providing the best, most flexible presentation of the process data.

The large, bright display, with fluorescent chart illumination, provides easy viewing of the data and chart. The flexible product configuration in 5 languages makes it easy to set up and use.

The DPR180 is especially suited to match the needs of chemical, pharmaceutical, power generation, metals processing, environmental monitoring, and other applications where the best chart resolution is required.

• 180 mm (7 inch) chart width.
• 0.05% accuracy full scale. Applicable on a wide choice of actuations and ranges.
• Each input span is adjustable within the selected range, with up to 2 ranges per input.
• Universal (T/C, RTD, mV, mA, V), or linear input (mV, mA, V).
• Fast input scanning (20/sec.)
• Fluorescent display of 2 row of 16 digits, with adjustable brightness.
• Roll or fan fold chart with same cassette. Fully documented chart with trace color assign, thin/thick trace, alarm in red tagging, zooming, zoning, trend, tabular, messages.
• Channel groups available.
• I/O capability : up to 24 analogue inputs, up to 36 output relays, up to 36 digital inputs, up to 8 retransmitted signals.
• Advanced math package
• Fully configurable through the front keys, front PC jack or communication link.
• 2 chart speeds configurable from 1 to 5000 mm/h (0.04 to 200 inch/hr).
• Up to 48 customer messages of 50 characters each.
• Firmware upgradable by PC (Flash memory).
• Input calibration traceable per channel, or channel group.
• Up to 2 custom-input characterizations available.
• Up to 48 alarm set points freely assignable on analogue inputs, maths, communication.
• Up to 36 internal output relays assignable on analogue inputs, maths, events, logic inputs.
• Configurable Periodic chart documentation.
• Periodic report.
• Universal power supply : 100 to 240 Vac/dc.
• Up to 8 retransmitting outputs (4 to 20 mA).
• Universal comm. output: ASCII in RS232, 422/485. MODBUS RTU in RS422/485. ETHERNET/MODBUS RTU Interface,
• Metal door/case, IP55 rated

Select a link under the "item" tab below to order.

Table 1Table 2Table 3Table 4Table 5Table 6Table 7Table 8Table 9Table 10Table 11Table 12Table 13Table 14Table 15Table 16Table 17Table 18Table 19Table 20Table 21
D18DPR 180 Strip Chart Recorder
Table 2Digital Inputs/Alarms/Analog Outputs-Slot L
A6 Alarm Relay Outputs (Alarm 13 to 18)
D6 Digital Inputs (Digital 13 to 8)
Table 3Digital Inputs/Alarms/Analog Outputs-Slot N
A6 Alarm Relay Outputs (Alarm 25 to 30)
D6 Digital Inputs (Digital 25 to 30)
C4 Auxiliary Current Outputs (1 to 4)
Table 4Digital Inputs/Alarms/Analog Outputs-Slot P
A6 Alarm Relay Outputs (Alarm 31 to 36)
D6 Digital Inputs (Digital 31 to 36)
C4 Auxiliary Current Outputs (5 to 8)
Table 5Digital Inputs/Alarms/Analog Outputs-Slot M
A6 Alarm Relay Outputs (Alarm 19 to24)
D6 Digital Inputs (Digital 19 to 24)
Table 6Communications
1Universal Communication (ASCII - Modbus)
2Ethernet Interface
APCMCIA Interface
Table 8Math
AMath Package
Table 9Future
Table 10Door and Case
0Grey Door, Glass Window, with Latch, Standard Case
1Grey Door, Glass Window, with key Lock, Standard Case
2Grey Door, Plastic Window, with Latch, Standard Case
3Grey Door, Plastic Window, with key Lock, Standard Case
EBlack Door, Glass Window, with Latch, Black Case
FBlack Door, Glass Window, with key Lock, Black Case
Table 11Miscellaneous
ATest Report (Calibration Certificate) (Note 5)
BCertificate of Conformance
AProduct Configuration (Note 3)
BProduct Configuration with User Defined Actuation (Note 3)
UUser Defined Actuation (Note 3)
0None (Future)
CCSA Approval/NRTL/C
Table 12Input Card 1(Slot A)
L4 Linear Inputs (Channel 1 to 4)
U4 Universal Inputs (Channel 1 to 4)
Table 13Factory Specials
XXSpecial ST # (refer special list)
Table 14Language/Prompts/Manuals
0Product Information on CD
EEnglish Manual
Table 15Input Card 2 (Slot B)
L4 Linear Inputs (Channel 5 to 8)
U4 Universal Inputs (Channel 5 to 8)
Table 16Input Card 3 (Slot C)
L4 Linear Inputs (Channel 9 to 12)
U4 Universal Inputs (Channel 9 to 12)
Table 17Input Card 4 (Slot D)
L4 Linear Inputs (Channel 13 to 16)
U4 Universal Inputs (Channel 13 to 16)
Table 18Input Card 5 (Slot E)
L4 Linear Inputs (Channel 17 to 20)
U4 Universal Inputs (Channel 17 to 20)
Table 19Input Card 6 (Slot F)
L4 Linear Inputs (Channel 21 to 24)
U4 Universal Inputs (Channel 21 to 24)
Table 20Digital Inputs/Alarms/Analog Outputs-Slot J
A6 Alarm Relay Outputs (Alarm 1 to 6)
D6 Digital Inputs (Digital 1 to 6)
Table 21Digital Inputs/Alarms/Analog Outputs-Slot K
A6 Alarm Relay Outputs (Alarm 7 to 12)
D6 Digital Inputs (Digital 7 to 12)
Technology   Microprocessor-based (32 bits), with non volatile memory.
Flash memory for product software upgrade, or specials, via the front jack.
Analogue inputs No. of inputs From 4 up to 24 in groups of 4.
Input boards 2 types :
4 linear inputs per board : mV, V, mA
4 universal inputs per board : mV, V, mA, T/C, RTD, Ohms
Signal source Thermocouple with cold junction compensation, or with remote compensation
temperature configurable between 0 to 80ºC (32 to 176ºF)
Line resistance up to 1000 Ohms for T/C, mV, mA, V
RTD Pt100 Ohms, 3 wire connections, 40 Ohms balanced max.
Basic math
Square root extraction or channel differential are standard.
Burnout T/C, mV, V (except following ranges) configurable to upscale, downscale or none
Volt : -500, 0, 500 mV ; -1, 0, 1V ; -2, 0, 2V; -5, 0, 5V ; 0, 10V ; -10, 0, 10V :
Inherent to Zero volt.
RTD : inherent upscale ; mA : inherent downscale.
Display Fluorescent
2 rows of 16 digits, 8.5 mm (.33 inch) high, matrix display.
Can display 1 or 2 PV values (5 digits) per line, engineering units (5 digits), alarm status, tag name, math, speed, event messages etc.
Brightness The display brightness is configurable
Record Chart 180 mm (7.09") width
Traces Up to 24 traces, configurable in 6 colors, thin or thick traces, plus digital traces
Traces are configurable on analogue inputs, math, communication or digital inputs
Scaling Per input, up to 2 analogue scales can be configured to be printed on the chart,
with engineering units, channel reference and tag name. Each input can be
configured independently. The scale can be linear, with up to 10 sub-divisions
Print mode Trend : Up to 24 traces, with periodic chart documentation configurable in time, from 1 minute to 24 hours with date, time, scales, digital PV print-out over traces or on blank paper, with channel reference, digital traces, alarm messages and customer message.
Tabular : Tabular print-out configurable in time from 1 to 1440 minutes with channel number, tag name, digital PV value, engineering unit, alarm status.
Zoning Each input can be scaled between 0 to 100% of the chart (minimum zone = 20%).
Printing group Up to 2 groups of channels can be defined, with printing selection by :
Alarm, logic inputs or keypad
Pen carriage
1.4 second full scale
Chart length   Roll or fan fold chart 35 meters (115 ft)
Chart speed   1 or 2 chart speed, fully configurable, selected by : Logic input, alarm communication, front key.
Speed setting Speeds 1 and 2 are configurable from 1 up to 5000 mm/hr (0.04 to 200 in/hr)
Resolution Chart resolution is 0.19 mm (0.0075")
Access The configuration can be accessed using front keys, PC configurator, or ASCII communication with LPCS software.
Protection 2 password levels protect the unit configuration from unauthorized access. Level 1 = limited access, Level 2 = full protection.
Front keyboard Configurable and alphanumeric keys allow the operator to change the recorder operation
PC configuration Through the front jack, the unit can be configured from a PC using a Honeywell PC interface. This provides the facility to copy the product configuration, modify, store, download or upload the configuration, access service diagnostics, and also to upgrade the recorder firmware.
Logic inputs
Number of inputs Up to 36 input contacts, organized in groups of 6 contacts per card Dry contacts (5 mA - 5 Vdc)
Actions Change speed 1 to speed 2, tab interval 1 to 2, digital print-out, print message, print inhibit, event traces, print math calculations. Change range, start/stop math operations Change print group, actuate a relay output Up to 20 event traces are configurable in color and position from 0 to 100% of the chart
Alarms Set points Up to 48 set points, freely assignable to analogue inputs, math or communication.
Alarm type High, low, change rate low, change rate high, change rate high-low or deviation with configurable alarm occurrence.
Actions Can trigger a message, print channel in red in alarm, print in alarm, change the range, change the speed/tabular, print digital PV's Start/stop the math, select the print group, actuate a relay output
Relay output
Up to 36 internal relays : 2 A, 250 Vac on resistive load.
1 SPST contact output, normally closed contact (NC), configurable to normally open (NO). Configurable alarm relay acknowledgement.
Alarm event   The recorder can be configured to display events such as : 1 alarm, 1 channel in burnout, paper out, battery fail, communication interrupted
Messages Up to 48 freely assignable messages of 50 characters each Can be printed with or without date and time over the traces, by alarms, logic inputs, communication, when alarm is ON, OFF or ON/OFF.
Process Values Periodic digital print-out at time intervals configurable from 1 minute to 24 hours or through alarms, digital inputs, communication.
Tag name Each channel can have up to an 8 character name
Chart scales each can be configured from 0 to 9 subdivisions
Periodic reports startup time and period configurable Min, Max, average of selected channels or (math computation) are printed in alphanumeric. Report size max. = 20 lines.
  Up to 50 breakpoints can be used to define a custom range/actuation. Up to 2 ranges can be defined using the PC Configurator.
Polynomial characterization available as special.

  Many functions are available such as : Basic math, SqRt, Fo, mass flow
totalization, energy consumption, averages, timers, min., max., carbon potential,
alarm/logic pulse totalization, RH.
The calculations are stored during power interruption.
Actions The results can be recorded as a trace, a tabular print-out, a periodic report, sent to the communication link, or used to generate a current output signal
Protocols ASCII in RS232, 422/485.
MODBUS RTU in RS422/485.
Interface configured with standard IP address and is utilized with 3rd party software that provides TCP/Modbus driver and OPC capability.
Actions Archiving of PV traces, alarms and events with file names, file size is 24Mbytes max. Logging time selectable from 1 second up to 30 minutes.
PC Analysis TrendManager Pro provides an easy and powerful way to analyze trend, alarm and event files as well as to export them in spreadsheet format (CSV).

Current output Up to 8 signals, 4 to 20 mA dc, can be generated by the recorder (Organized in blocks of 4 output signals) Max. Line impedance = 800 Ohms These can be configured for : analogue traces, math calculations, PV's from the communication link. The zero and span are configurable.
Clock timer Format Year, month, hour, minute can be set
Power interruption Battery backed (10 years time, 3 years power off)
Accuracy 10-5 at reference conditions
Power supply   100 to 230 Vac/dc, (24 Vac/dc on request). Consumption = 100 VA max
Packaging Weight 18 Kg max. (38 lbs)
Front bezel 310 x 317 mm (12.2 x 12.5 inches)
Panel cutout 278 x 278 mm (10.9 x 10.9 inches)
Depth 320 mm (12.6 inch) including the rear cover
Front protection IP55
Lock Latch, optional key DIN 43832-N
Door Die cast aluminum : Dark gray or black (optional), door opens to 180º
Mounting Panel mounting ± 30º from the horizontal
Wiring Screw terminals : Terminal blocks plug on to the boards at the back of the recorder
Temperature Ambient 0 to 50ºC (32 to 132ºF), 0 to 40ºC (32 to 104ºF) for fan fold paper
Storage -40 to 70ºC (-40 to 160ºF)
Humidity Roll chart 10 to 90% RH non-condensing
Fan fold 15 to 80% RH non-condensing
Vibrations   Frequency 10 to 60 Hz, amplitude 0.07 mm, 60 to150 Hz acceleration1g
Accuracy Reference
Temperature = 23ºC ± 2ºC (73ºF ± 3ºF)
Humidity = 65% RH ± 5%
Line voltage = Nominal ± 1%
Source resistance = 0 Ohm
Series mode and common
Accuracy Field calibration accuracy 0.05% of the selected range (IEC 873),
Chart resolution : 0.18 mm (0.007").
Cold junction accuracy : ± 0.5ºC (32.9ºF)

Main menu 2

about seo