Browse by Manufacturer

# Product Code Quantity
1
2
3
4
5

Honeywell 10260A Series Herculine ® Actuators

Honeywell
Herculine ® Actuators
10260A Series

To operate with maximum efficiency and improve process uptime, state-of-the-art control systems require accurate, responsive, and repeatable actuation of final control devices.

Actuators are often overlooked when considering maintenance and ancillary support costs, yet they play an important role in system performance and can directly impact your company’s bottom line.

Honeywell's 10260A medium torque industrially rated rotary actuator is engineered for exceptional reliability, accurate positioning, and low maintenance. Designed for very precise positioning of dampers and quarter turn valves, the 10260A performs especially well in extremely demanding environments requiring continuous-duty, high reliability, and low maintenance. Typical applications include furnace pressure dampers, fuel/air ratio valves, windbox dampers, coal mill dampers, scoop tubes, and Fluid Gyrols.

• Accurate Positioning Motor/gear train provides accuratepositioning with instantaneous start/stop characteristics
• Enclosure Rugged, industrial grade enclosure
• Non-Contact Position Sensing Non-contacting sensing lowers maintenance costs and improves performance.
• Low Maintenance Simple-proven design means high reliability/low maintenance.
• Duty Cycle 100 % duty cycle motor.
• Torque High torque capability in small package (10 to 300 lb-ft of torque)
• Control Signals 4-20 mA, 1-5 Vdc, Position proportional (PAT), Open/close (contact closure)
• Output Signals 0/4-20 mA, 0/1-5 Vdc (0-16 Vdc), and slidewire emulation.
• Power Requirements Low power consumption 120/240 Vac, 50/60 Hz, single phase < 1 amp.
• Full Travel Speed Full stroke travel speeds from 10 to 60 seconds (90 degree travel, 60 Hz supply)
• Manual Operation All 10260A series actuators are supplied with a manual handwheel to operate the actuator when power is not available.
• Auto-Manual electric handswitch with auxiliary contacts indicating an Out-of-Auto position is available for local electric control.
• Output Shaft Hardware All 10260A series actuators are supplied with an adjustable radius and adjustable position crank arm. Optional 12” crank arm, linkage kits, and direct coupling hardware are available.
• Limit Switches All 10260A series actuators are supplied with two end-of-travel electric limit switches. Up to 4 additional SPDT auxiliary switches are available.
• Warranty Exceptional warranty – 18 months from shipment date
• Certification CSA, UL and CE available

Select a link under the "item" tab below to order.

Table 1Table 2Table 3Table 4Table 5Table 6Table 7Table 8Table 9Table 10Table 11Table 12Table 13Table 14Table 15
XXXXXXXXXXXXXXXXXXXXX
Table 1KEY NUMBER - Torque and Speed
Output Torque (lb. - ft.) (n - M)
10261A10 (15)
10262A20 (27)
10264A40 (55)
10266A60 (80)
10267A40 (55)
10268A80 (110)
10269A150 (200)
10263A200 (270)
10265A300 (400)
Table 2POWER SUPPLY - SINGLE PHASE
1120 VAC 60, Hz Single Phase 120 VAC 60Hz Motor
2120 VAC 50 Hz, Single Phase 120 VAC 50Hz Motor
3220/240 VAC 60 Hz, Single Phase 220/240 VAC 60Hz Motor
4220/240 VAC 50 Hz, Single Phase 220/240 VAC 50Hz Motor
Table 3CONTROLS
14-20mAdc / 1-5Vdc, 4-20mAdc or 1-5Vdc (w/resistor change)
Table 4CUSTOMER POSITION OUTPUTS
01SEC, (Note 1) One slidewire emulation output (3-Wire Pos. Proportional)
03Analog Output, (Note 2) 4-20mAdc, 0-20mAdc, 0-5Vdc, 1-5Vdc, or 0-1.25Vdc
04(Note 3) Film Potentiometer, Dual 1000 ohm
05Single 1000 ohm
Table 5CONTACT OUTPUTS
2Limit/Auxiliary Switches, 1CW, 1CCW, & 2 Auxiliary SPDT Switches
4Limit/Auxiliary Switches, 1CW, 1CCW, & 4 Auxiliary SPDT Switches
5Limit/Auto-Manual, 1CW, 1CCW, Auto/Man Switch
7Limit/Auto/Auxiliary, 1CW, 1CCW, Auto/Man Switch & 2 Aux
9Limit/Auto/Auxiliary, 1CW, 1CCW, Auto/Man Switch & 4 Aux
Table 6Shafts
15 Inch (127,0 mm) Extension
33 Inch ( 76,2 mm) Extension
Table 7Projecting Scale
13/4 Inch (19,05 mm) Shaft Coupling, CW
23/4 Inch (19,05 mm) Shaft Coupling, CCW to Open
31 Inch (25,4 mm) Shaft Coupling, CW
41 Inch (25,4 mm) Shaft Coupling, CCW to Open
5CW to Open, No Coupling
6CCW to Open, No Coupling
Table 8Crank Arm
1None
212 Inch (304,8 mm)
Table 9Rod Adapter
13/8 Inch (9,53 mm)
Table 10Linkage Kits
112 In. (30,5 cm) to 16 In. (40,6 cm) Turnbuckle Kit
216 In. (40,6 cm) to 20 In. (50,8 cm) Turnbuckle Kit
320 In. (50,8 cm) to 24 In. (60,9 cm) Turnbuckle Kit
41 Inch (25,4 mm) Pipe Kit
51.5 Inch (38,1 mm) Pipe Kit
62 Inch (50,8 mm) Pipe Kit
Table 11Weatherproof
1NEMA 4/IP66
Table 12Approvals
1CE
2CSA
3UL
Table 13Tagging
1Linen (Note 4)
2Stainless Steel (Note 4)
Table 14Special Manuals
1English (European format)
2French (European format)
Table 15Other
2Certificate of Conformance
Physical:
Weight: 40 lb. (18 kg) net
Enclosure: Precision-machined Aluminum alloy casting, finished in light gray powder coat epoxy.
Mechanical Stops: To prevent over-travel.
Operating Temperature: –30 °C to +85 °C (–20 °F to +185 °F)
Storage Temperature: –40 °C to +93 °C (–40 °C to +200 °F)
Relative Humidity: Fully operable over the range of 0-99 % R.H. non-condensing
Scale: 0 % to 100 % corresponding to full crank arm travel.
Crank Arm: Adjustable radii (1-7/16" to a maximum of 5"). Position adjustable through 360° rotation.
Optional 12" crank arm adjustable 0-12" radii.
Rotation: 90° degrees between 0 % and 100 % on scale, limited by mechanical stops.
Direction of Rotation: Field selectable via switch and jumper. Default = CCW (determined looking into the shaft)
Manual Handwheel: Provides a means of positioning the actuator in the event of a power failure or set-up.
Lubrication: Texaco Starplex 2 EP Grease
Fuses: Bussmann GDB1.6: 1.6 Amp Fast
Littlefuse 312001: 1.0 Amp Fast
Output Torque/Full Travel Stroking Time: Model # Torque Output Shaft Speed sec/90°
10261A
10262A
10264A
10266A
10267A
10268A
10269A
10263A
10265A
Lb-ft N-M @60Hz @50Hz
10
20
40
60
40
80
150
200
300
15
27
55
80
55
110
200
270
400
10
20
40
60
20
40
60
40
60
12
24
48
72
24
48
72
48
72
Electrical:
Mains Supply: 120 Vac single phase, 50 or 60 Hz
240 Vac single phase, 50 or 60 Hz
Motor: Instant start/stop, non-coasting, non-burnout, continuous duty permanent magnet synchronous induction motor. Can be stalled up to 100 hours without damage.
Loss of Power: Stays in place.
Local Auto/Manual Switch: Optional – Allows local and automatic operation of the actuator.
Limit Switches: Standard – Two SPDT end of travel limits
Certifications:
Approvals CE Compliance/CSA/UL
Torque Settings of Crank Arm Bolts:
Clamp Bolt: Standard Arm (Part Number 087449) (1-7/16-5 in. adjustment): 85 lb-ft.
Optional Long Arm (Part Number 154007) (0-12 in. adjustment): 85 lb-ft.
Rod End Bolt: Standard and long arms: 30-35 lb./ft