Jump to Navigation

Hancock 5500 Series Globe Stop Valves

Globe Stop Valves
5500 Series

Direct contact, metal-to-metal seating, make the globe valve ideal for most shut-off applications. ½" to 2" forged steel.

• The 5500 has a fixed, repairable seat overlaid with Stellite or equal hardfacing.
• Available with threaded or socket weld end connections as standard.
• Valves are made using one-piece, die forged bodies.
• All internal surfaces are accurately machined to provide maximum performance.
• The disc is hardened, ground, and lapped to ensure leak free sealing over the valve’s full pressure/temperature range.
• A precision machined, integral backseat is standard.
• Both seats are designed for accurate, repeatable, seating alignment.
• Corrosion inhibited graphite packing and braided graphite filament anti-extrusion rings are standard.
• Standard body and bonnet materials are carbon steel (ASME SA105), alloy steel (ASME SA182 Gr. F11) and stainless steel (ASME SA182 Gr. F316) Trim for steel valves is 13% chrome 316 stainless steel valves have 316 trim.
• Also available in a variety of body and trim materials.
• A needle disc option is available.
• Code compliance with ASME/ANSI B16.34 and the ASME Boiler and Pressure Vessel Code, Section I.

Select a link under the "item" tab below to order.

Table 1Table 2Table 3Table 4Table 5
XXXXXXXXXXXXXX
Table 1Cv
½”1.4
¾”3.0
1”5.2
1½”15.0
2”19.3
Table 2Valve Type Number
5500Globe Valve, T-Type Integral Seat
Table 3End Connection
SThreaded End
WSocket Weld End
Table 4Design Change Number
22
Table 5Material Combination Suffix
NoneA105 Body and Bonnet, 13 Cr. Trim
-445F11 Body and Bonnet, 13 Cr. Trim
-535316 Body, Bonnet and Trim
-1449316 Body, Bonnet and Trim (Trim is Hard-faced with Stellite)


Main menu 2

about seo