Jump to Navigation

Fireye PPC6000 Series Fuel Air Ratio Controller

Fuel Air Ratio Controller
PPC6000 Series

The Fireye PPC6000 is a state of the art stand-alone parallel position system for all types of liquid or gaseous fuel fired combustion systems. When combined with a Fireye flame safeguard system such as the Fireye BurnerLogix control, the PPC6000 offers the most compact and advanced parallel positioning system available. Four fuel profiles allow the PPC6000 to accommodate a variety of applications such as two fuels, with and without, the optional variable speed drive (VSD). With each profile having up to 24 points entered to assure a smooth “curve”, the microprocessor interpolates points between entered values and precisely positions fuel and air to within +- .1 degree. This eliminates hysteresis for improved efficiency. The PPC6000 is capable of powering up to ten 24volt servomotors supplied from the integral transformer. All servomotors and displays operate on a secure CANbus communications protocol and can be “daisy chained” together for simplified wiring. Two independent PID control loops for temperature or pressure control provide precise, accurate control of firing rate for unmatched response to load changes. Four safety rated user definable digital inputs are standard and can be configured for functions such as lead lag, night setback, thermal shock warm up, etc. Digital inputs can also be configured as analog inputs via the optional programmable function blocks using Fireye Abacus software. Built in lead lag sequencing for up to four boilers is included in every PPC6000. More elaborate lead lag schemes may be possible using the programmable function blocks.
Two variations of multifunction vacuum florescent displays are available:
• NX600 standard display provides programming, status, and fault information.
• NX610 display provides automatic storage of operating parameters and profiles for upload/download to the PPC6000. In addition, three line voltage fully programmable relays are mounted inside the display.
Other options include, two Variable speed drive (VSD) outputs via daughter board, Oxygen Trim using Fireye’s proven heated zirconia oxide probe and optional interface, a wide variety of communications platforms such as Modbus are also available.
An optional internal freely programmable logic section of the PPC6000 means that external PLC’s and expensive stand-alone sequencing controls may no longer be needed. Easy to program and protect, this new feature will make the PPC6000 suitable for many unique or unusual applications. Functions such as lead lag, sequencing, feedwater control and draft control are just some of the ways this feature can be used.
Optional ComFire software allows the user to view and control all aspects of the burner system, provides real time trending and logging, upload and download of profiles and options. The user can build custom screens or import actual photographs of the combustion equipment for animation.

• State of the art surface mount technology
• Smallest footprint available: 7.0” x 4.5” x 2.5”
• Capable up to ten servomotors powered from the control
• Two PID loops for precise process control
• Simple four wire CANbus wiring reduces time and mistakes
• Optional VSD card provides two VSD’s and one Analog output
• Re-transmittal of most data as 420mA output (requires NXDBVSD option)
• VSD encoder feedback available
• Standby lag boiler on water temp.
• Built in lead/lag sequencing for up to four boilers
• Fully programmable function block programming allows for custom applications such as draft control or feedwater control
• Two levels of displays: Basic and Basic with Backup
• Unparalleled worldwide support

Select a link under the "item" tab below to order.

Cat #DescriptionsType
PPC6000Stand-alone parallel positioning controller, with up to ten (10) selectable function CANbus servo-motor outputs. Includes user configurable function blocks for custom applications. Display ordered separately.PPC6000 FUEL AIR RATIO CONTROLLER
NX600Basic CANbus display for PPC6000. No upload/download capability.DISPLAY MODULES FOR PPC6000
NX610CANbus display for PPC6000 with upload/download of PPC6000 data and three programmable relaysDISPLAY MODULES FOR PPC6000
NXC044 wire CANbus Servo-motor, 3 ft lbs., 4 Nm, 50/60 Hz, 24 VAC.SERVO-MOTORS FOR PPC6000
NXC124 wire CANbus Servo-motor, 9 ft lbs., 12 Nm, 50/60 Hz, 24 VAC.SERVO-MOTORS FOR PPC6000
NXC204 wire CANbus Servo-motor, 14.75 ft lbs., 20 Nm, 50/60 Hz, 24 VAC.SERVO-MOTORS FOR PPC6000
NXC404 wire CANbus Servo-motor, 29.5 ft lbs., 40 Nm, 50/60 Hz, 24 VAC.SERVO-MOTORS FOR PPC6000
NXDBMBModbus RTU interface card for PPC6000 / NX6100. Networks up to 15 Fireye Nexus Systems - one card per controlEXPANSION INTERFACE MODULES FOR PPC6000
NXDBVSDVSD interface daughter board with two VSD channels, one analog output, two counter inputs, two programmable relays, isolated RS485 -Modbus RTUEXPANSION INTERFACE MODULES FOR PPC6000
NXO2INTCANbus O2 interface module with Fireye and generic (4-20mA) probe inputs.EXPANSION INTERFACE MODULES FOR PPC6000
NXO2PK4O2 probe assembly (for flues 300mm to 1000mm). Includes NXIATS CANbus ambient temperature sensor, flange kit.O2 PROBES FOR PPC6000 ONLY
NXO2PK6O2 probe assembly (for flues 600mm to 2000mm). Includes NXIATS CANbus ambient temperature sensor, flange kit.O2 PROBES FOR PPC6000 ONLY
NXO2PK8O2 probe assembly (for flues 1200mm to 4000mm). Includes NXIATS CANbus ambient temperature sensor, flange kit.O2 PROBES FOR PPC6000 ONLY
NXIATSPPC6000 CANbus Inlet (ambient) Air Temperature SensorO2 PROBES FOR PPC6000 ONLY
PXMS-15Steam Pressure Sensor: 0 - 15 PSI, 0 - 1 bar, 4-20mA output, 1/2” NPT, non self-check (for use with PPC6000 / NX3100 / NX4100 / PPC5000).SENSORS FOR PPC6000 / NX3100 / NX4100 / PPC5000
PXMS-200Steam Pressure Sensor: 0 - 200 PSI, 0 - 14 bar, 4-20mA output, 1/2” NPT, non self-check (for use with PPC6000 / NX3100 / NX4100 / PPC5000).SENSORS FOR PPC6000 / NX3100 / NX4100 / PPC5000
PXMS-300Steam Pressure Sensor: 0 - 300 PSI, 0 - 21 bar, 4-20mA output, 1/2” NPT, non self-check (for use with PPC6000 / NX3100 / NX4100 / PPC5000).SENSORS FOR PPC6000 / NX3100 / NX4100 / PPC5000
TS350 (-2), (-4), (-8)Temperature Sensor, Range 32ºF-350ºF (0-176ºC), 4-20mA linear output, includes 1/2 - 14 NPT well. See bulletin BLZPTS-1 for complete description.SENSORS FOR PPC6000 / NX3100 / NX4100 / PPC5000
TS752 (-2), (-4), (-8)Temperature Sensor, Range 32ºF-752ºF (0-400ºC), 4-20mA linear output, includes 1/2 - 14 NPT well. See bulletin BLZPTS-1 for complete description.SENSORS FOR PPC6000 / NX3100 / NX4100 / PPC5000
NXAMComFire communications software on CD for Nexus and PPC controls.SOFTWARE


Main menu 2