Jump to Navigation

Fireye NX6100 Series Integrated Burner Controller

Integrated Burner Controller
NX6100 Series

The Fireye NEXUS NX6100 Integrated Controller is a microprocessor based, Flame Safeguard and Parallel Positioning Combustion Controller built into one compact, user configurable package. The system consists of the Controller, Display, Temperature / Pressure Sensors, Servo-Motors and optional Comfire Software.

• Proof of main valve closure
• Selectable main gas safety proving sequence
• Supervised pre-purge
• Low fire starting position
• Pilot and main trials for ignition
• Main flame supervision
• Post purge

Supply voltage: 120/230Vac +10% - 15%
Power consumption: Approx. 60VA
Supply frequency: 50/60 Hz ±5%
Ambient temperature range: 0 to 60°C (32 to 140°F)
Control unit protection category: IP20. The control must be situated in a clean environment according to EN6730-1.
Indoor: Control must be mounted in an NEMA1 (IP40) enclosure
Outdoor: Control must be mounted in an NEMA3 (IP54) enclosure
Unit dimensions:  Control unit 210 x 125 x 80mm (8.27 x 4.92 x 3.15 in) deep
Display 158 x145 x 44mm (6.22 x 5.71 x 1.73 in) deep
Weight:  Control unit 2.13kg (4.70 lbs)
Display 0.90Kg (1.98 lbs)
Type of display: 2 lines x 20 characters, vacuum fluorescent display with membrane keypad

ORDERING INFORMATION:

DISPLAY MODULES
SERVO MOTORS FOR NX6100 / PPC6000
EXPANSION INTERFACE CARDS FOR NX6100 / PPC6000
O2 PROBES FOR NX6100 / PPC6000
TEMPERATURE SENSORS FOR NX3100 / NX4100 / NX5100 / NX6100
ACCESSORIES FOR O2 PROBES FOR NX3100 / NX4100 / NX5100 / NX6100 / PPC5000 / PPC6000
COMMUNICATION SOFTWARE FOR NX3100 / NX4100 / NX5100 / NX6100 / PPC5000 / PPC6000
TEMPERATURE SENSORS FOR NX6100 / PPC6000
STEAM PRESSURE SENSORS FOR NX3100 / NX4100 / NX5100 / NX6100 / PPC5000 / PPC6000


Main menu 2