Jump to Navigation

Schneider Electric CP-8301-xxx Series Electronic Actuator Drive

Electronic Actuator Drive
CP-8301-xxx Series

The CP-8301-xxx Series electronic actuator drive is designed to process a variable 2 to 15 Vdc signal from a controller to provide proportional control of an electric gear train actuator.

• Mounts directly onto TAC proportional, electric, gear train actuators.
• 24, 120, and 240 Vac models available.
• Color-coded pigtail leads.

 

Select a link under the "item" tab below to order.

Cat #Power RequirementsPower SupplyªStart Point of Actuator
CP-8301-0242420 Vdc, 50 mA regulated and filtered.Adjustable from 2 to 12 Vdc input. Factory set at 6 Vdc.
CP-8301-12012020 Vdc, 50 mA regulated and filtered.Adjustable from 2 to 12 Vdc input. Factory set at 6 Vdc.
CP-8301-24024020 Vdc, 50 mA regulated and filtered.Adjustable from 2 to 12 Vdc input. Factory set at 6 Vdc.
Inputs:
Control signal: Range: 2 to 15 Vdc
Span: refer to Model Chart
Start point: refer to Model Chart
Power requirements: Refer to Model Chart
Power supplies: Refer to Model Chart
Outputs:
Connections: Color coded pigtail leads
Mounting: Directly to an actuator
Case: Bakelite
Environment:
Ambient temperature limits: Shipping and storage: -40 to 140° F (-40 to 60°C)
Operating: -40 to 140° F (-40 to 60°C)
Humidity: 5 to 95% RH, non-condensing
Locations: NEMA Type 1
Dimensions: 4 H x 4 W x 3-1/4 D in.(102 x 102 x 83 mm)
Agency Listing:
UL 873: Underwriters Laboratories (File #E9429 Category Temperature-Indicating and Regulating Equipment
CSA : Canadian Standards C22.2 No. 24-93
General Instructions : Refer to F-14940


Main menu 2