Jump to Navigation

Pneumatic Sensors and Controllers

142

Used for visual indication of the value of a variable required to report system or functional operating status, Receiver Gauges are available as 1-1/2-inch (38 mm), 2-1/2-inch (64 mm), and 3-1/2-inch (89 mm) diameter gauges with a barb fitting for 1/4-inch (6 mm) OD polyethylene tubing.

184

The 184 Temperature Transmitters are direct acting, one-pipe instruments that sense temperature and transmit a proportional 3 to15 psi (21 to 103 kPa) pneumatic signal to a remotely located receiver gauge and/or receiver controller. Temperature Transmitters operate on the force-balance principle...

195

The 195 Single Input Receiver-Controller is a pneumatic controller which receives one pneumatic input, and produces a pneumatic output signal based on the net pneumatic input and the mechanical settings of the setpoint and percent proportional band. This controller can be easily changed from...

195

The 195 Multiple Input Receiver-Controller is a pneumatic controller that receives up to three pneumatic inputs and produces a pneumatic output signal based on the net pneumatic input and the setpoint, percent proportional band, and authority settings. The Controller can be easily changed from...

A25X

Receiver gauges for continuous indication of temperature, differential static pressure, differential pressure, pressure, enthalpy, or humidity in conjunction with a transmitter-receiver system. Select “donut” type dials listed for required application.

H-5500 H-5502

Humidity Indicators show the relative humidity being measured by a transmitter with a 3 to 15 psig (21 to 105 kPa) pneumatic output.

LP914

One-pipe, direct-acting temperature sensor used with RP908/ RP920 Controllers to provide proportional control of pneumatic valve or damper actuators. Rod and tube insertion element for duct, well, or through-the-wall mounting.
• Corrosion resistant.
• Continuous temperature...

P541

The receiver controllers are used with remote pneumatic transmitters to provide proportional control in pneumatic control systems. They are designed primarily for use with pneumatic transmitters; however, they may be used with any pneumatic device having an output of 3 to 15 psig, such as...

RKS Series

For use in conjunction with remote proportional transmitters for proportional control of pneumatic actuated dampers, valves, etc., in air conditioning systems. The transmitter-receiver-controller system may be used to control temperature, humidity, or pressure.

Pages

Subscribe to Pneumatic Sensors and Controllers


Main menu 2