|
Remote Bulb Temperature Controls
The A19 Series are single-stage temperature controls that incorporate environmentally friendly liquid-filled sensing elements.
This thermostat provides remote bulb or coiled bulb sensing for hazardous environments.
This is a changeover control for use with combination heating and cooling thermostats.
Sturdy compact thermostat designed especially for temporary installations.
Wide range temperature control with air coil sensing element.
This is a wide-range temperature control with a special air coil sensing element and an adjustable mounting flange.
Wide range temperature control with adjustable dial stops and mounting flange.
Remote bulb control with adjustable defrost termination temperature and preset fan delay temperature.
Remote bulb temperature control with limited set point range, adjustable differential, and adjustable cut-out.
This is a wide range temperature control with rainproof enclosure, SPDT switch, and 5 F° fixed differential.
This is a remote bulb temperature control with a rainproof (NEMA Type 3R) enclosure.
This is a universal replacement control for open high or SPDTapplications. The control is furnished with a well assembly for 1/2 inch tapping.
A SPDT, strap-on, surface type hot water control for direct or reverse action. Can be used as either an open high control or an open low control.
The A350R Reset Controller is designed to raise or lower the setpoint of supply water temperature based upon a proportionate drop or rise in temperature at the master (outdoor) sensor. The control output is a Single-Pole, Single-Throw (SPST) normally open relay with Light-Emitting Diode (LED) indication. The adjustable differential enables the...
Immersion-type controllers that combine high limit protection with switching relay control of burner and circulator motors.
Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems, including domestic hot water service.
High limit, low limit and/or circulator controllers used to regulate boiler water temperature in gas- or oil-fired hydronic heating systems.
L8100A,B, and C are immersion type controllers for regulating and limiting the tank temperature in water heaters. As the water temperature rises past the setpoint, the controller switches off the gas valve.
Remote bulb thermostats regulate temperature of air or liquids in ducts, pipes, tanks and boilers.
Ambient temperature compensated, high-limit controllers for agriculture and industrial applications.
Aquastat® Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks, and other applications where temperature control is required.
Aquastat® Controllers are immersion type devices for limiting or regulating the temperature of liquids in boilers, storage tanks, and other applications where temperature control is required.
For modulating control of water or air temperature in ducts, tanks and similar applications.
Proportional remote bulb controllers for ducts, tanks, boilers, pipes and other heat exchangers.
