Jump to Navigation

Yarway

Series 151

The Series 151 Dual Range Steam Trap is designed for use on both batch and continuous applications such as batch stills, autoclaves, reboilers, storage tanks, shell and tube heat exchangers and tank coils. The Dual Range Steam Traps are capable of handling high startup and running loads, and...

Series 29 Disc Trap

Series 29 traps retain all the essential benefits of disc trap performance – they are compact, easy to install, self-draining and unaffected by water hammer or freezing, while providing the economy of integral seat design. Constructed of all stainless steel, the trap has only three parts; disc,...

Series 40 and 40D

The Series 40 and 40D is designed for use in industrial process applications for pressures up to 600 psi and condensate loads to 80,000 lb/hr.

Applicable Codes and Standards:
Pressure ratings per ANSI/FCI-69-1. Performance testing per ANSI/ASME PTC-39.1. End...

Series 460 and 515

The Yarway High Pressure Integral Strainer Trap is designed with Quick Change Trim (QCT) using the proven variable orifice (piston) internals. These traps are designed for a variety of high pressure applications found in utility, industrial and marine service. 

The small, lightweight...

Series 711/721

The Series 711/721 Unibody Plus disc trap is designed for light load applications such as steam tracing, steam line drip, and turbine drain. These traps are fully renewable in-line, energy efficient and easy to check.

The 711 is a simple straightway body. The 721 is a straightway body...

Series 731/741

The Series 731/741 UniBody Plus variable orifice (piston) traps are designed for applications to 600 psi. The “A” internals are designed for light load applications such as steam tracing and drip. The “B”, “C” and “E” internals are designed for the heavier process loads. The solid metal...

Series 751/761

The Series 751/761 is available in two body designs and with three Filled Thermal Elements (FTEs). The Series 761 is an in-line body with an integral wye strainer and blowdown valve. The Series 751 is an in-line body only. The FTEs to 300 psi are the -5 for drip tracing and light process; the -...

Series C-250 and C-260

The Yarway High Pressure Integral Strainer Trap is designed with Quick Change Trim (QCT) using the proven variable orifice (piston) internals. These traps are designed for a variety of high pressure applications found in utility, industrial and marine service.

The small lightweight...

Series C-500 and 546

Designed for condensate removal in high pressure industrial, electric utility and marine systems, Yarway supplies a range of compact and easily maintained thermodynamic traps.

Substantially smaller than comparable mechanical traps for high pressure application, the Yarway traps occupy...

Unibody Plus Capsules

Pages

Subscribe to Yarway


Main menu 2