Browse by Manufacturer

# Product Code Quantity
1
2
3
4
5

Schneider Electric

Schneider Electric
Schneider Electric
2-Way Globe Valves, Screwed (½ to 2 in.) and Union Sweat (½ to 2 in.) with Hydraulic Actuators
Select Actuator Type or Actuator Code
(XXX) series with correct...
Schneider Electric
2-Way Globe Valves, Screwed (½ to 3 in.), Union Sweat (½ to 2 in.) and Flanged (2-½ to 6 in.) with Pneumatic Actuators
1/2 to 2 in. Valves, select Actuator or
Actuator Code (XXX) with correct Input
...
Schneider Electric
2-Way Globe Valves, Screwed (½ to 3 in.), Union Sweat (½ to 2 in.) and Flanged (2-½ to 6 in.) with Pneumatic Actuators

2-1/2 to 6 in. Valves, select Actuator orActuator Code (XXX) with correct InputSignal having sufficient close-off forthe application. If selecting ComponentParts, select Valve Linkage and PositivePositioner if required.

2-1/...
Schneider Electric
2211 through 2218 Series

These pneumatic room thermostats are designed for proportional temperature control of pneumatic valves and damper actuators to maintain room air temperatures in heating, ventilating, and air conditioning systems.

Schneider Electric
2326 Series

The 2326 Series Reset Volume Controller is designed to control the air volume through air terminal units. It controls the velocity and the output volume of these units between preset high and low limits, and responds to changes in the branch pressure of a pneumatic device. In effect, the 2326 controller is a submaster, supply air velocity...

Schneider Electric
900-012
Schneider Electric
A25X

Receiver gauges for continuous indication of temperature, differential static pressure, differential pressure, pressure, enthalpy, or humidity in conjunction with a transmitter-receiver system. Select “donut” type dials listed for required application.

Schneider Electric
AK-42309-500

Positive positioner pneumatic relay is used to accurately position an actuator stroke with respect to signal pressure from the controller. It can also be used to change the effective spring range of an actuator and increase the capacity of a controller.

Schneider Electric
AKR-40605

Pneumatic 1:1 ratio direct acting relay is used to limit minimum or maximum output pressure. The AKR-40605 can also be used as a manual positioner, 1:1 ratio relay, or lowest of two pressures selector. Relay will also increase the capacity of a controller (except when used as maximum output limiter or lowest pressure selector).

Schneider Electric
AKS-1100

Setpoint adjuster and scale plates used to provide remote setpoint adjustment of RKS-2001, RKS- 4002, and RKSR-4000 receiver-controllers. May also be used to manually pilot pneumatic relays.

Schneider Electric
AL-15x Series

For applications where an electrical circuit is used to control a pneumatically operated device. Used to direct supply air to a pneumatic device when the coil is energized or de-energized depending on the supply and exhaust air connections. May be used for selection or diverting applications.

Schneider Electric
AL-161-4

Three-way air switching valve is used for central supply air changeover in dual pressure systems.

Schneider Electric
AL-17x Series, AL-18x Series

For applications where an electrical circuit is used to control a pneumatically-operated device. Used to direct supply air to a pneumatic device when the coil is energized or de-energized, depending on the supply and exhaust air connects.

Schneider Electric
AL-19x Series

For applications where an electrical circuit is used to control a pneumatically operated device. Used to direct supply or control air to pneumatic devices when the coil is either energized or de-energized, depending on the supply and exhaust air connections.

Schneider Electric
Ball Valve Assemblies Using TAC DuraDrive Actuators
Schneider Electric
Butterfly Valve Assemblies

Schneider Electric’s new butterfly valve line offers a wide range of two- and three-way sizes, along with low pressure pneumatic spring return, electric non-spring return, and spring return actuator models that operate with on/off, floating, or proportional control signals. All assemblies include industry leading butterfly valve features...

Schneider Electric
CC-810X Series
System 8000

Electronic controlled relays are offered in dual, or dual with one having heat anticipation for time proportional control of electric heat.

Schneider Electric
CP-8102, CP-8102-116
System 8000

This two-input temperature or humidity controller provides heating, cooling, humidification, or dehumidification control in HVAC systems.

Schneider Electric
CP-8301-xxx Series
2 to 15 Vdc Input

The CP-8301-xxx Series electronic actuator drive is designed to process a variable 2 to 15 Vdc signal from a controller to provide proportional control of an electric gear train actuator.

Schneider Electric
Damper Actuators, Proportional

For proportional pneumatic actuator with 11 sq. in. (71 cm²) effective area used to control damper and air valves in heating, ventilating, and air conditioning systems.

Schneider Electric
Damper Actuators, Proportional

For proportional pneumatic actuator with 20 sq. in. (129 cm²) effective area used to control damper and air valves in heating, ventilating, and air conditioning systems.

Schneider Electric
Damper Actuators, Proportional

For proportional pneumatic actuator with 3 in.² (19 cm²) effective area used to control small dampers and mixing boxes.

Schneider Electric
HC-101 Series, HC-201

These controllers provide low or line voltage on-off single stage control of humidifiers, dehumidifiers, valves, solenoid valves, compressors, relays, etc.

Schneider Electric
M556 Series
6 in Stroke (24.8 sq. in. damper)
Schneider Electric
M572 Series
2 in Stroke (3 sq. in. damper)
Schneider Electric
M573 Series
3 in Stroke (7 sq. in. damper)
Schneider Electric
M574 Series
4 in Stroke (11 sq. in. damper)
Schneider Electric
MA-3xx Series, MA-4xx Series

These actuators provide two-position operation of dampers, valves, and other equipment requiring the return to normal position upon power interruption.

Schneider Electric
MA-5200 Series, MA-5300 Series

These actuators are used for electric two-position control of globe valves and dampers which require a return to the normal position upon power interruption.

Schneider Electric
MicroNet TM 2000

TAC MicroNet Sensors are a family of digital room temperature sensors used with the TAC MicroNet 2000™ Controllers. Available in three models, TAC MicroNet Sensors are microprocessor-based and include industry standard thermistors for accurate room sensing and plug-in communication jacks for the TAC MicroNet Controller Interface.

...
Schneider Electric
MK-121xx Series

For proportional pneumatic actuator with 3 in.² (19 cm²) effective area used to control small dampers and mixing boxes.

Schneider Electric
MK-3xxx Series

Proportional pneumatic actuator with 8 in.² (52 cm²) effective area used to control dampers, mixing boxes, air valves, etc., in heating, ventilating, and air conditioning systems.

Schneider Electric
MK-44xx Series

For proportional pneumatic actuator with 11 sq. in. (71 cm²) effective area used to control damper and air valves in heating, ventilating, and air conditioning systems.

Schneider Electric
MK-71xx Series

For proportional pneumatic actuator with 20 sq. in. (129cm²) effective area used to control damper and air valvesin heating, ventilating, and air conditioning systems.

For proportional pneumatic actuator with 20...
Schneider Electric
MK-7821, MK-7921

For proportional pneumatic actuator used to control inlet vanes on small and medium size fans or large jackshafted dampers.

Schneider Electric
MK4-3xxx Series
Schneider Electric
MK4-44xx Series

For proportional pneumatic actuator with 11 sq. in. (71cm²) effective area used to control damper and air valvesin heating, ventilating, and air conditioning systems.

Schneider Electric
MK4-71xx Series

For proportional pneumatic actuator with 20 sq. in. (129cm²) effective area used to control damper and air valvesin heating, ventilating, and air conditioning systems.

Schneider Electric
MP-2xxx Series

The MP Series Actuators are used for two-position, floating, and proportional control of dampers, valves, and program switches in heating, ventilation, and air conditioning applications or similar applications.

Schneider Electric
MP-3xx Series

The MP Series Actuators are used for two-position, floating, and proportional control of dampers, valves, and program switches in heating, ventilation, and air, conditioning applications or similar applications.

Schneider Electric
MP-3xx Series, MP-4xx Series, MP-2xxx Series, and MP-4xxx Series
The MP Series Actuators are used for two-position, floating, and proportional control of dampers, valves, and program switches in heating, ventilation, and air conditioning applications or similar applications.
Schneider Electric
MP-4xx Series

The MP Series Actuators are used for two-position, floating, and proportional control of dampers, valves, and program switches in heating, ventilation, and air conditioning applications or similar applications.

Schneider Electric
MP-4xxx Series

The MP Series Actuators are used for two-position, floating, and proportional control of dampers, valves, and program switches in heating, ventilation, and air conditioning applications or similar applications.

Schneider Electric
MP-52xx Series

These actuators provide electronic proportional control of dampers, valves, or program switches requiring the return to normal position upon power interruption.

Schneider Electric
MP-52xx Series

These actuators provide electronic proportional control of dampers, valves, or program switches requiring the return to normal position upon power interruption.

Schneider Electric
MP-54xx Series

These actuators provide electronic proportional control of dampers, valves, or program switches requiring the return to normal position upon power interruption.

Schneider Electric
N800-0555 Series

The N800-0555 is used with M556 (6 in. stroke), M573 (3 in. stroke), and M574 (4 in. stroke) damper actuators. The N800-0555 is pilot-operated, providing excellent response to small signal pressure changes from the controller. Pilot-operation also provides maximum resistance to actuator shaft displacement caused by outside force changes.

Schneider Electric
P541

The receiver controllers are used with remote pneumatic transmitters to provide proportional control in pneumatic control systems. They are designed primarily for use with pneumatic transmitters; however, they may be used with any pneumatic device having an output of 3 to 15 psig, such as thermostats or humidistats. Both direct and reverse...

Schneider Electric
Pneumatic Damper Actuators
Proportional pneumatic actuator with 8 in.² (52 cm²) effective area used to control dampers, mixing boxes, air valves, etc., in heating, ventilating, and air conditioning systems.
Schneider Electric
Pneumatic Damper Actuators
These actuators are designed for use in pneumatic control systems to position air control dampers in response to signals from pneumatic controllers. The M556 is a large swivel-mounted actuator with an adjustable crank arm having a clamp to fit a 1/2 in. O.D. damper shaft. The M570 Series damper actuators are used in pneumatic control systems to...
Schneider Electric
R432 Series (2372 Series)

The pressure selector relays are designed for use in pneumatic control systems where the application requires the comparison, selection, and transmission of the higher or lower of two proportional signals. R432-11 can also be used as a booster relay.

Schneider Electric
R503 Series (2353-5xx Series)

The R503-1 and R503-2 diverting relays are snap-acting devices with adjustable setpoints. They are designed for a variety of switching and interlocking functions in pneumatic control systems where the application requires one or more of the following functions: feeding and exhausting branch lines, diverting a supply line to either one of two...

Schneider Electric
R504 Series (2354 Series)

The R504 Series diverting relays are snap-acting devices designed for a variety of switching and interlocking functions in pneumatic control systems where the applications may require one or more of the following functions: feeding and exhausting branch lines, diverting a supply line to either one of two branch lines or diverting either one of...

Schneider Electric
R516 (2360-501)

The reversing relay is a proportioning device designed for use in pneumatic control systems where the application requires the reversing of a proportional signal from a controlling device. The R516 branch line pressure decreases in direct proportion to an increase in input signal pressure and also amplifies the volume of air available for the...

Schneider Electric
R527 Series, R528 Series (2368-5xx Series)

The electric-pneumatic relays are three-way, two-position, electrically activated air valves for use in pneumatic control systems where the application requires a variety of switching, diverting, or interlocking functions, actuated by an electrical circuit. The R527 Series switches one SPDT pneumatic circuit while the R528 Series are designed...

Schneider Electric
R527 Series, R528 Series (2368-5xx Series)

The electric-pneumatic relays are three-way, two-position, electrically activated air valves for use in pneumatic control systems where the application requires a variety of switching, diverting, or interlocking functions, actuated by an electrical circuit. The R527 Series switches one SPDT pneumatic circuit, while the R528 Series are designed...

Schneider Electric
R532 Series (2372 Series)

The volume booster relay is a proportioning device designed for use in pneumatic control systems where the application requires amplifying the volume of control air to final control devices. System transmission lag is minimized by using this relay in conjunction with a proportional controller operating several diaphragm valves or damper...

Schneider Electric
R533 (2373-501)

The selector relay is a device designed for use in pneumatic control systems where the application requires the comparison, selection, and transmission of the highest and/or the lowest of up to six pneumatic input signals. All input ports are “dead-ended” and no signal air passes through the relay to the output ports.

Schneider Electric
R534 (2379-501)

The signal repeating relay is a proportioning device for use in pneumatic control systems where it is desirable to repeat a pneumatic signal accurately, such as the output signal from a pneumatic transmitter which must be transmitted to receiver controllers or indicators at multiple locations. In addition to accurately repeating the input...

Schneider Electric
R537 (2375-501)

The summation relay is a proportioning device for use in pneumatic control systems where the application requires the addition of two pneumatic signals. The branch line pressure increases in direct proportion to the sum of the two input signals and amplifies the volume of air available for the final control device, thereby minimizing system lag...

Schneider Electric
R539 (2378-501)
The amplifying relay is a proportioning device designed for use in pneumatic control systems where the application requires the amplification of a proportional signal from a controlling device. The relay’s branch line pressure output increases as a 2:1 ratio to the input signal pressure (up to main air pressure) and amplifies the volume of air...
Schneider Electric
R540 (2376-501)

The averaging relay is a proportional device designed for use in pneumatic control systems where the application requires operation of a final control device, or some other control action such as resetting a receiver controller, by the average of the signals from two pneumatic devices. The relay also amplifies the volume of air available to...

Schneider Electric
RKS Series

For use in conjunction with remote proportional transmitters for proportional control of pneumatic actuated dampers, valves, etc., in air conditioning systems. The transmitter-receiver-controller system may be used to control temperature, humidity, or pressure.

Schneider Electric
S510, S511 Series (2390 Series)

The S510 gradual switch is designed to allow manual setting of a desired pressure, up to main air pressure, where the application requires remote positioning of final control devices or remote control point adjustment of a pressure signal is desired. The S511-5 and S-511-10 have been designed with an internal high pressure selector relay,...

Schneider Electric
S515 (2390-515)

The S515 pressure regulator allows the manual setting of any desired air pressure, up to main pressure, where the application requires remote positioning of final control devices, remote control point adjustment of receiver controllers, or any other application where manual setting of an output pressure is desired.

Schneider Electric
S52x Series, S53x Series, S54x Series (239X-500 Series)

These switches are manually operated devices adaptable to a wide variety of applications in pneumatic control systems. They are normally used to perform diverting or supply and exhaust functions to operate final control components or index relays in multiple switching systems. The S520 is a two-position, four-branch switch. The S521 is a two-...

Schneider Electric
Schneider Electric Direct Coupled Actuators Non-Spring Return Actuators
The MF4 and MS4 Series DuraDrive™ Direct Coupled, Non-spring Return Actuators are designed to accept tri-state or proportional control signals from a DDC system or a thermostat for HVAC damper applications. Typical applications include air handling unit dampers and inlet vanes, VAV boxes, and unitary equipment. The actuators range in torque from...
Schneider Electric
Schneider Electric Direct Coupled Actuators Spring Return Actuators
The DuraDrive™ Direct Coupled, Spring Return Actuators accept two-position, tri-state, or proportional control signals from a DDC control system or a thermostat for HVAC damper applications. Typical applications include air handling unit dampers.They range in torque from 35 to 150 in-lb (4 to 17 Nm).
Schneider Electric
T150

The T150 Series pneumatic temperature transmitters are designed to measure air or fluid temperatures in pneumatic control systems and transmit a fixed span, 3 to 15 psig signal to controlling and indicating devices such as receiver controllers, receiver gauges, sensitive pressure switches, or snap-acting R503-1 diverting relays. These...

Schneider Electric
T200

T200 series thermostats provide temperature control on a variety of heating, cooling and single stage heat pump applications.

The large LCD window displays room temperature including 1/5th of a degree increments indicated by a series of up to 5 dashes. The system heat output cycles on a 1 or 2F degree field selectable differential....

Schneider Electric
TA-155 Series, TB-155 Series

The T155 series thermostat provides on/off control for low voltage and line voltage control of valves, relays and fan motors. Applications include two-pipe and four-pipe fan coil units, air handling units, and heating and cooling applications.

Schneider Electric
TA-158 Series, TB-158 Series

The T158 series microprocessor based thermostat/controller with digital display provides 3-wire floating, on/off control, or a combination of 3-wire floating and on/off control. This series controls a variety of two-pipe and four-pipe fan coil units, air handling units, and various heating and cooling applications. The microprocessor combines a...

Schneider Electric
TA-167 Series, TB-167 Series

The T167 series microprocessor based thermostat/controller provides 0-10 Vdc control. This series controls a variety of two-pipe and four-pipe fan coil units, air handling units, unitary equipment, and various heating and cooling applications.

Schneider Electric
TA-168 Series

The T168 series microprocessor based thermostat/controller provides 0-10 Vdc or 4-20 mA control. This series controls variety of two-pipe and four-pipe fan coil units, air handling units, and various heating and cooling applications. The microprocessor combines a proportional plus intergral control algorithm with advanced adaptive logic. This...

Schneider Electric
TA-170 Series, TB-170 Series

The T170 series microprocessor based stand-alone controller supplies line or low voltage relay control of heat, cool, outside air and fan. Designed for 1 heat, 1 cool, on/off vent damper and fan speed control applications.

Schneider Electric
TC-1xx Series, TC-11xx Series, TF-1111 Series

These thermostats provide on-off control of heating/cooling systems.

Schneider Electric
TC-2931, TC-2942

This thermostat provides summer-winter changeover in hydronic heating-cooling systems.

Schneider Electric
TC-2974

This thermostat provides hot water unit heater control and summer-winter changeover. May be used as either an open high control or an open low control. 

Schneider Electric
TC-4100 Series, TC-4200 Series

For on-off control of media temperature in ducts, tanks, liquid lines, etc.

Schneider Electric
TC-5231 Series, TC-5232, TC-5241 Series

The TC-5231, TC-5232, and TC-5241 low temperature thermostats are used to control temperature in air conditioning or refrigeration systems.

Schneider Electric
Three-Way Valves
Schneider Electric
TK-17xx Series

For proportional control of pneumatic-actuated valves and damper actuators to maintain room air temperatures in heating, ventilating, and air conditioning systems. 

Schneider Electric
TK-1xxx Series, TK-5xxx Series

For proportional temperature control of pneumatic valves and damper actuators to maintain room air temperatures in heating, ventilating, and air conditioning systems.

Schneider Electric
TOOL-078
Schneider Electric
TOOL-082
Schneider Electric
TOOL-087
Schneider Electric
TOOL-091
Schneider Electric
TOOL-095-1
Schneider Electric
TOOL-100-500
Schneider Electric
TP-1011, TP-1031 Series

For proportional temperature control of electric actuated valves, damper actuators, and sequence controllers.

Schneider Electric
TP-8101, TP-8102, TP-8121, TP-8124

These temperature controllers are used in heating and air conditioning systems.

Schneider Electric
Two-Way Valves
Schneider Electric
Valve Actuators
Schneider Electric
VB-2000 Series

The Schneider Electric VA, VF, and VS-2x13-xxx-9-xx series Ball Valve Assemblies are complete actuator/valve assemblies that accept two-position, floating, or proportional control signals from a DDC system or a thermostat, for control of hot or chilled water, or solutions of up to 50% glycol. They consist of direct-coupled, TAC...

Schneider Electric
VBB/VBS Series

The Schneider Electric DuraDrive VBB/VBS series ball valves combine a unique, low force valve design with a compact actuator to create an assembly that is faster and easier to install than any other ball valve assembly in the industry. The VBB/VBS series products accept floating and proportional control signals from a DDC system,...

Schneider Electric
VM Series PopTop™

The Schneider Electric Modulating PopTop™ Series valve actuator assemblies are designed for closed hydronic heating and cooling systems. The Modulating PopTop is used to control fluid flow in fan coil units, VAV reheat, unit ventilators, AHUs and radiant applications. The Modulating PopTop Proportional (P) type is compatible...

Schneider Electric
VT/VS PopTop™ Series

PopTop Series valve bodies and actuators provide easy installation for a variety of heating and cooling applications. Valve’s actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler. VS Series valves are available for low pressure steam applications.