Jump to Navigation

Johnson Controls

D-4070

The D-4070 Two Stage Pneumatic Actuator is a multipurpose positioning device used to accurately position small dampers primarily on unit ventilators, Variable Air Volumes (VAVs), terminal units, and small ventilating dampers in response to output signals of a pneumatic controller or electro-...

D-4073

The D-4073 Pneumatic Actuator is a multipurpose positioning device used to accurately position small dampers primarily on unit ventilator, Variable Air Volume (VAV), terminal units, and small ventilating dampers in response to output signals of a pneumatic controller or electro-pneumatic...

D350 Series

The D350 Digital Display Module is used in conjunction with the A350, A350E, A350P, and A350R series temperature controls. A 3-digit LCD display provides continuous read-out of the actual space temperature. By pressing and holding the setpoint button for three seconds, the actual setpoint can...

D351

The D351 Digital Display Module is used in conjunction with the W351 and W351P Humidity Controls. A 3-digit LCD display provides continuous readout of the actual humidity sensed by the HE-67S3-0N0BT or HE-67S3-0N00P Series Humidity Transmitters. By pressing and holding the setpoint button for...

D352

The D350, D351, and D352 Display Modules are designed for use with System 350TM temperature, humidity, and pressure controls to provide a digital readout of sensor or setpoint values—at the push of a button. As are all System 350 products, the display modules are housed in a NEMA 1 high-impact...

DMPR-KC003

DMPR-KC002, DMPR-KC003, DMPR-KC004, and DMPR-KC007 are blade pin extensions used to accommodate external linkages and actuators. They should be used on the preferred driving blade.

DMPR-KC005

DMPR-KC005 is a 7 inch long blade pin extension with a coupler to be attached to another blade pin extension. It should be used on the preferred driving blade.

DMPR-KC051

DMPR-KC051 provides a connection from actuator to damper blade pin extension with a 3/8 inch diameter drive shaft, adjustable from 1 to 2-3/4 inch radius.

DMPR-KC054

Use the DMPR-KC054 Blade Arm to link damper actuator rod hardware directly to damper blades.

DMPR-KC202

DMPR-KC202 horizontally couples panels pin-to-pin. Order one kit per 48 inches of panel height. Install a coupler on every pin.

Pages

Subscribe to Johnson Controls


Main menu 2

about seo