Jump to Navigation

Johnson Controls

C-9200

The C-9200 Pneumatic Sequencing Cumulator provides sequential operation of controlled devices that are operated by the same control signal. The cumulator may also be used to correct changes in spring ranges of controlled devices caused by pressure or other external forces. Refer to C-9200...

C-9500

The C-9500 Two-Position Pilot Cumulator switches its output from zero to full input pressure at a pre-selected pressure. The cumulator provides for two-position action from a proportional control signal. Refer to C-9500-1 Two-Position Pilot Cumulator Product Bulletin (LIT-7171445) for importnt...

C-9504

The C-9504 Two-Position Cumulator provides a two-position output signal from a proportional input signal. The output can be powered by either the supply pressure or the input signal. The appropriate configuration is chosen in the field. Refer to C-9504 Two-Position Cumulator Product Bulletin (...

C-9506

The C-9506 Air Switching Cumulator switches output pressure from zero to full supply pressure when the pilot pressure reaches the switch point. Refer to C-9506 Air Switching Cumulator Product Bulletin (LIT-7171455) for important product information.

CD-Pxx-00-0 Series

Johnson Controls offers a complete line of carbon dioxide (CO₂) modules that measure and transmit CO₂ levels ranging from 0 to 2,000 parts per million [ppm]. This compact device offers a choice o f 0 to 10 V or 0 to 20 mA output signals and features an optional relay output with or without a...

CD-Wxx-00-0 Series

Johnson Controls offers a complete line of carbon dioxide (CO₂) modules that measure and transmit CO₂ levels ranging from 0 to 2,000 parts per million [ppm]. This compact device offers a choice of 0 to 10 V or 0 to 20 mA output signals and features an optional relay output with or without a...

D-3031

The D-3031 Pneumatic Actuator is designed primarily for damper positioning on small terminal units. Models, furnished with 1 inch (25 mm) stroke, have two movable adjustment stops to facilitate adjusting the stroke in 1/8 inch increments. The D-3031 features a polycarbonate top and body and a...

D-3062

The D-3062 Pneumatic Piston Damper Actuator accurately positions small dampers on Variable Air Volume (VAV) and terminal units. The actuator is also recommended for use on other air flow control dampers in interiors with a maximum area of 4 ft2 (such as Johnson Controls D-1300 Series Dampers)....

D-3153

The D-3153 Pneumatic Actuator is a multipurpose positioning device used primarily for operating ventilating dampers in response to the output signals of a pneumatic controller or electro-pneumatic transducer. The D-3153 can be used with dampers up to a maximum area of 16 square feet for...

D-3240

The D-3240 Series Pneumatic Piston Actuators are multipurpose positioning devices designed for operating inlet vanes on centrifugal fans and compressors, in direct response to the output signal of a pneumatic controller. These actuators can also be used on other applications that require a large...

Pages

Subscribe to Johnson Controls


Main menu 2